Volvo XC 70 Owner's Manual page 232

Web edition
Hide thumbs Also See for XC 70:
Table of Contents

Advertisement

05 Comfort and driving pleasure
Trip computer
Resetting a digital instrument panel
Trip odometer
1. Turn the thumb wheel to select the com-
bination of headings containing the trip
odometer to be reset.
2. Press and hold RESET until selected trip
odometer is reset.
Average speed and fuel consumption
Trip computer reset
1. Select
OK.
2. Select one of the following alternatives
using the thumb wheel and press OK:
mpg
05
mph
Reset both
3. Finish by pressing RESET.
Changing units
To change the unit (miles/km) used to meas-
ure distance and speed, go to
Settings
System options
and fuel
units.
The illustration is generic; certain details may vary from model to model
2
*
230
Option/accessory, for more information, see Introduction.
NOTE
In addition to changing units in the trip
computer, this also changes the units used
in the Volvo Navigation System (VNS)*.
Trip statistics*
Trip information from previous trips regarding
average fuel consumption and average speed
and press
is stored and can be displayed in the form of
a bar chart.
Function
MY CAR
Distance
Trip statistics
Each bar represents a driving distance of
1 mile or 10 miles, depending on the current
2
scale; the bar at the far right shows the value
for the current mile/10 miles.
Use TUNE to change between 1 mile and
10 miles; the marker at the right will also
change according to the scale selected.
Settings
Settings can be made in the MY CAR menu
system as follows:
MY CAR
My XC70
Trip
statistics:
Start new trip
: press ENTER to erase all
pervious statistics. Exit the menu by
pressing EXIT.
Reset for every driving cycle
pressing ENTER. Exit the menu by press-
ing EXIT.
Reset for every driving cycle
Selecting
ses all trip statistics automatically if the igni-
tion is switched off for at least 4 hours. When
the engine is restarted, new statistics will be
stored.
To get new statistics if the engine is restarted
before 4 hours have elapsed, the existing
ones have to be erased manually by selecting
Start new trip
.
For additional information, see page 207.
: select by
era-

Advertisement

Table of Contents
loading

Table of Contents