03 Your driving environment
Lighting
Hazard warning flashers
03
Location of the hazard warning flasher button
The hazard warning flasher should be used to
indicate that the vehicle has become a traffic
hazard.
–
To activate the flashers, press the button
in the center dash. Press the button again
to turn off the flashers.
NOTE
•
Regulations regarding the use of the
hazard warning flasher may vary,
depending on where you live.
•
The hazard warning flashers will be
activated automatically if an airbag
deploys.
104
Turn signals
Turn signals
When changing lanes
The driver can automatically flash the turn
signals 3 times by moving the turn signal
lever up or down to the first position and
releasing it.
When turning
Move the lever as far up or down as pos-
sible to start the turn signals. The turn signals
will be cancelled automatically by the move-
ment of the steering wheel, or the lever can
be returned to its initial position by hand.
NOTE
•
This automatic flashing sequence can
be interrupted by immediately moving
the lever in the opposite direction.
•
If the turn signal indicator flashes
faster than normal, check for a
burned-out turn signal bulb.
Interior lighting, front
Light switches, front roof lighting
Drivers side front reading light, on/off
Passenger's side front reading light,
on/off
Overhead courtesy lighting.