Table of Contents
Advertisement
Freelance XD 500 ~ 4th Edition ~ 2nd March '03 ~ 5162
Connect the telephone
7
line cord to the base
Plug the telephone line
cord into the line socket
on your base and connect
the other end to the
telephone line socket on
your wall.
8
To set the day and time
The message counter on
the base unit will flash
between 0 and C until the
day and time are set.
The day and time
must be set using the
Freelance XD 500
handset.
Your Freelance XD 500
automatically adds the day
and time to all messages
and memos received.
When you first switch the
power on, the clock is set
to Sunday, 12.01pm.
You can change the day
and time as required.
Press the
on the Freelance XD 500
handset.
The main menu
announcements are
automatically announced
through the handset
earpiece when the
button is pressed twice.
Press the 0 button.
0
The prompt will announce,
"To set day and time press
✱
, to hear day and time
#
press
".
(Please note that if you
press the
allows you to check the
day and time.)
Press the
The prompt will announce,
"Please enter new day and
time after the tone".
After the tone enter the
day, followed by the time
using the 24 hour clock.
1 = Sun, 2 = Mon,
3 = Tues, 4 = Wed,
5 = Thur, 6 = Fri, 7 = Sat.
button twice
Note
#
button this
✱
button.
16
Advertisement
Table of Contents
