Oil Piping - New Yorker FR SERIES Installation, Operating And Service Instructions

VI. Oil Piping
A
. GENERAL
1. Use flexible oil line(s) so that burner door can
be opened, or burner can be removed, without
disconnecting the oil supply.
2. A supply line fuel oil filter is recommended as a
minimum for all firing rates but a pleated paper fuel
oil filter is recommended for the lowest firing rate
applications to prevent nozzle fouling.
3. Use Flared fittings only. Do not use compression
fittings.
4. Use of a high efficiency micron filter (Garber or
equivalent) in addition to the conventional filter is
highly recommended.
18
B
O
e l
l
Figure 14: Single-Pipe Installation
. SINGLE-PIPE OIL LINES
1. Standard burners are provided with single-stage
3450 rpm fuel units with the bypass plug removed
for single-pipe installations.
2. The single-stage fuel unit may be installed single-
pipe with gravity feed or lift. Maximum allowable
lift is 8 feet. See Figure 14.
N O
l i p p i n i g m u t s b e a b
a k s o r o l s s f o p i r m
n i e a n d u f l e u n t i c o m
T C I E
s o u l e t y l i a t r g i t h o r
e m a y e r s u . t l B e l e d
l p t e l e . y