Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Omnitronic XO-2300
Summary of Contents for Omnitronic XO-2300
- Page 1 BEDIENUNGSANLEITUNG USER'S MANUAL MODE D'EMPLOI XO-2300 Active crossover © COPYRIGHT Für weiteren Gebrauch aufbewahren! Nachdruck verboten! Keep this manual for further needs! All rights reserved! Gardez ces instructions pour des utilisations ultérieurs! Réproduction interdite! 1/20 10304055_EF.DOC...
- Page 2 2/20 10304055_EF.DOC...
-
Page 3: Active Crossover
- include every supplementay update with the original manual INTRODUCTION Thank you for having chosen an OMNITRONIC XO-2300. You have acquired a reliable and powerful device. If you follow the instructions given in this manual, we can assure you that you will enjoy this device for many years. -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS CAUTION! Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric shock when touching the wires! This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual. -
Page 5: Installation
Besides that a longer cable may lead to humming and noise trouble. If long cable runs are unavoidable, you should use balanced cables. The inputs of your OMNITRONIC XO-2300 are equipped with 1/4" jack socket balanced and unbalanced. OUTPUTS The high damping factor of your crossover supplies a clear sound reproduction. -
Page 6: Operation
CONNECTION TO THE MAINS Connect the OMNITRONIC XO-2300 only after having made sure that the right voltage (115/230 V) is available. This device features a T 0,25 A, 250 V fuse. STARTING UP Make sure to power-up before your power amplifier is turned in order to avoid loud transients which could damage your speakers or annoy your audience. - Page 7 7/20 10304055_EF.DOC...
- Page 8 2-way stereo operation with mono-subwoofer Most common setting in discotheque appliances. Phase erasions in the bass-range can be avoided and the system gains around 3 dB in the bass-range. Please switch the stereo/mono switch to 2-way stereo. The frequency is devided into two sections marked as channel 1 (left) and channel 2 (right). This user guide will only explain the functions of one section.
-
Page 9: Way Mono Operation
Example for setting the frequency ranges (depending on the system and the room): Bass Highs 100 Hz - 10 kHz 100 Hz - 10 kHz The frequency can be adjusted via the Frequency-control, depending on the Range-switch between 100 Hz and 1000 Hz or between 1 kHz or 10 kHz (LED lit). - Page 10 10/20 10304055_EF.DOC...
-
Page 11: Cleaning And Maintenance
CLEANING AND MAINTENANCE DANGER TO LIFE! Disconnect from mains before starting maintenance operation! We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use alcohol or solvents! There are no servicable parts inside the device except for the fuse. Maintenance and service operations are only to be carried out by authorized dealers.
Need help?
Do you have a question about the XO-2300 and is the answer not in the manual?
Questions and answers