Table of Contents
Advertisement
Default Setting
Outdoor Bridge
Command Mode
Global Configuration
Example
Outdoor Bridge(config)#system name bridge-link
Outdoor Bridge(config)#
username
This command configures the user name for management access.
Syntax
username name
name - The name of the user.
(Length: 3-16 characters, case sensitive)
Default Setting
admin
Command Mode
Global Configuration
Example
Outdoor Bridge(config)#username bob
Outdoor Bridge(config)#
password
After initially logging onto the system, you should set the password. Remember to
record it in a safe place. Use the no form to reset the default password.
Syntax
password password
no password
password - Password for management access.
(Length: 3-16 characters, case sensitive)
Default Setting
null
Command Mode
Global Configuration
System Management Commands
6
6-13
Advertisement
Table of Contents
