Table of Contents
Advertisement
Example
Outdoor Bridge(config)#vlan enable
Reboot system now? <y/n>: y
Related Commands
native-vlanid (6-59)
native-vlanid
This command configures the native VLAN ID for the wireless bridge.
Syntax
native-vlanid <vlan-id>
vlan-id - Native VLAN ID. (Range: 1-64)
Default Setting
1
Command Mode
Global Configuration
Command Usage
When VLANs are enabled, the wireless bridge tags traffic passing to the wired
network with the configured native VLAN ID (a number between 1 and 64).
Example
Outdoor Bridge(config)#native-vlanid 3
Outdoor Bridge(config)#
Related Commands
vlan (6-58)
6
VLAN Commands
6-59
Advertisement
Table of Contents
