Show Line; System Management Commands - Quidway WB2011 User Manual

6
Command Line Interface

show line

This command displays the console port's configuration settings.
Command Mode
Exec
Example
The console port settings are fixed at the values shown below.
Outdoor Bridge#show line
Console Line Information
======================================================
databits : 8
parity : none
speed : 9600
stop bits : 1
======================================================
Outdoor Bridge#

System Management Commands

These commands are used to configure the user name, password, browser
management options, and a variety of other system information.
Command
Country Setting
country
Device Designation
prompt
system name
snmp-server contact
snmp-server location
User Access
username
password
Web Server
ip http port
ip http server
System Status
show system
show version
6-10
Function
Sets the wireless bridge country code for correct radio
operation
Customizes the command line prompt
Specifies the host name for the wireless bridge
Sets the system contact string
Sets the system location string
Configures the user name for management access
Specifies the password for management access
Specifies the port to be used by the web browser interface
Allows the wireless bridge to be monitored or configured from
a browser
Displays system information
Displays version information for the system
Mode Page
Exec 6-11
GC 6-12
GC 6-12
GC 6-24
GC 6-26
GC 6-13
GC 6-13
GC 6-14
GC 6-14
Exec 6-15
Exec 6-15