Table of Contents
Advertisement
Command Usage
The time acquired from time servers is used to record accurate dates and
times for log events. Without SNTP, the wireless bridge only records the time
starting from the factory default set at the last bootup (i.e., 00:14:00, January
1, 1970).
Example
Outdoor Bridge(config)#sntp-server enable
Outdoor Bridge(config)#
Related Commands
sntp-server ip (6-20)
show sntp (6-22)
sntp-server date-time
This command sets the system clock.
Default Setting
00:14:00, January 1, 1970
Command Mode
Global Configuration
Example
This example sets the system clock to 17:37 June 19, 2003.
Outdoor Bridge#sntp-server date-time
Enter Year<1970-2100>: 2003
Enter Month<1-12>: 6
Enter Day<1-31>: 19
Enter Hour<0-23>: 17
Enter Min<0-59>: 37
Outdoor Bridge#
Related Commands
sntp-server enable (6-20)
sntp-server daylight-saving
This command sets the start and end dates for daylight savings time. Use the no
form to disable daylight savings time.
Syntax
sntp-server daylight-saving
no sntp-server daylight-saving
Default Setting
Disabled
System Clock Commands
6
6-21
Advertisement
Table of Contents
