Picture Menu; Timer Menu - Akai CT-2110ASF Operation Manual

MENUS OPERATION (continued)

Picture Menu

1. Picture mode selection
Before shipment, the TV was given three preset picture modes:
MODE button to select one of
about each picture mode.
Mode
Soft The contrast is low, suitable for watching TV in mild surrounding light.
Nature Standard status, suitable for watching ordinary programs.
Rich The contrast is high, suitable for watching TV in bright environment.
User Picture quality user sets.
2. To adjust picture quality
To perform the following operation, press the
TV/AV mode) to select the PICTURE
Press the VOL-/VOL+ buttons to adjust
PICTURE
Contrast
Brightness
Color
Sharpness
........
The adjusted picture level is automatically stored
Notes:
"Tint" appears only when the signal system is set to
The adjustable "Tint" range is -50-+50, and other adjustments are 0-100.

Timer Menu

In the STANDBY or TURN ON mode, the TV can automatically complete some functions such as turn-on,
channel preset and turn-off as desired.
To perform the following operation, press
TV/AV mode) to select the TIMER menu.
the three preset modes or the User mode. Refer to the following table
Picture Quality
menu.
the
50
50
50
50
the
Soft,
MENU button repeatedly or the red button directly (in the
Press the CH-/CH+ buttons to choose an adjustment.
digital level of the selected adjustment as desired.
Item
Contrast
Brightness
Color
Sharpness
in the User position.
NTSC.
MENU button repeatedly or the yellow button directly (in the
6
Nature and Rich. Press
Adjustment Effect
Press VOL- Press VOL+
Lower Higher
Darker Brighter
Weaker Stronger
Lower Higher
the P.