Channel Selection; Recall; Tv/Av Selection; Menus Operation Menus - Akai CT-2110ASF Operation Manual

GENERAL OPERATION (continued)

Channel Selection

Pressing the CH-/CH+ buttons can select another lower-numbered
Direct selection
To select a one-digit channel number
Press the DIGIT button to choose "-" firstly, then press one of 0-9 buttons.
To select a two-digit channel number
Press the DIGIT button to choose
To select a three-digit channel number
Press the DIGIT button to choose
Note:
Please finish entering within 6 sec.

Recall

Press the RECALL button and the TV will directly skip back to the former signal source reception mode.

TV/AV Selection

In the TV mode, press the TV/AV button to enter the
signals from external equipment and automatically cuts off signals from the antenna terminal.
broadcast viewing, press the TV/AV button repeatedly or CH-/CH+ buttons. To receive signals from
external equipment, please select the relevant AV mode.
MENUS OPERATION
Menus
Press the MENU button repeatedly when watching TV programes, and the TV will display seven kinds of
menus (including PICTURE, TIMER, SETUP, TUNE, SWAP, HOTEL and BIORHYTHM) cyclically. Press
the CH+ /CH- buttons to select an adjustment
/VOL+ buttons to adjust.(Press the HELP button, and the operation hint will appear
corner of the menu.)
Menu selections are omitted in the following function with
control. If your remote control becomes invalid or lost, you can use many basic functions by pressing
buttons on the TV.
Menu display disappears 6 sec after last selection.
Note: ln the AV mode, TUNE menu and SWAP menu are
"--" firstly, then enter a
"---" firstly, then enter a first-digit, second-digit and third-digit.
AV mode. In the
(the characters turn white to cyan), and press
those
not
5
or upper-numbered channel.
first-digit and second-digit.
AV mode, the
buttons of the same name on
available.
TV receives AV
To resume
the VOL-
on the upper-right
the remote
the