Advertisement
ASSEMBLY
PACKINGUST
-Blower
- Blower Tube
- Battery and Charger
-Instruction manua'
Assembling the unit as a blower
Connect two blowe, tubes together.
Fit the larger diameter end of blower tubes onto the air outlet of the
motor housing and rotate until engaged.
UNPACKING
This product requires some assembly.
remOVe the product and
accessories from the
box
sure that all items listed in
packing list are induded.
Inspect Ihe product carefully to make sure
no
breakage or damage
occurred during shipping.
Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
If any parts are damaged or missing ,please call
1.800.313.5111
for assistance.
Avoid collisions with hard objects which could damage your machine.
Keep bystanders and animals at least
5
m away from the working area.
Make sure that
the
switch is in poSition "0' (off), the batter} pack is
disconnected and all the rotating
parts
are at a standstill before dean:ng,
canying out inspections or moiling from one place to another.
Do not put part of your body such as hands and fingers in the
vacuum opening or exhaust opening.
Do not switch the machine on in enclosed or poorly ventilated
spaces or in
the
of flammable andlor explosivs
substances
as liquids, gas and powders.
TUBE ASSEMBLY
line up the tube with the blower
housing
as
shown.
Into the blower housing unlil the
lock button engages the lock hole in the lube.
TO TURN THE TOOL ON
Push the lock button
In
with your thumb and then squeeze the
your fingers. (Once the tool is
you can release
button). To turn the tool
OFF,
release
trigger.
WARNING, Do Not use the blower with any type of accessory or
attachment Such usage mighl be hazardous.
BLOWlNG
Blow mode can be also used to clean corners, fences, walls,
wooden areas or beneath cars. Be careful how you point the jet of
air as it CQuid move heavy material and cause injury or damage.
Turn the swilch to on.
o~
you and move
forward slowly 10
of to mOve the leaves
from !naccessible areas.
based products,
parts. They
let brake fluids, gasoiine, pelroleum
or handles broken or
if
you sse any other
oils, etc., come in contact
'l~th
plastiC
condition that may
blower's operation, contact your local
can damage, weaken or
MAINTENANCE
careflJUy inspect it for damage. If the lube IS
Authorized Service Center for repairs before putting
]t
back into use.
Make sure tile
is detached from the unit, then use only mild
soap and
a
damp
to clean the tool. Never let any liquid get
inside the tool; never immerse any part of the tool into a liquid.
SAFETY
and
RELIABILITY,
repairs.
adjustment should be performed by an
authorized service cerner or other qualified service organization,
always using identical replacement parts.
destroy plastic.
Fertilizers and other garden chemicals contain agents which
greatly accelerate the corrosion of metals Do not store the tool
on or adjacent to fertilizers or chemicals.
CALL US FIRST
!!
Call us firs! with questions about operating or maintaining your cordless blower
at 1.800.313.5111 between 7:30 a.m. - 4:30 p.m. Eastern Standard Time,
or send emailstoearthwise@reelin.com.
Advertisement
