1. Manuals
  2. Brands
  3. TracVision Manuals
  4. Receiver
  5. Mobile Receiver
  6. User manual

TracVision Mobile Receiver User Manual

Hide thumbs Also See for Mobile Receiver:
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Mobile Receiver and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for TracVision Mobile Receiver

Summary of Contents for TracVision Mobile Receiver

  • Page 2 Welcome Page TracVision Mobile Receiver User’s Guide Congratulations! You have chosen TracVision, a revolutionary antenna system delivering live satellite TV entertainment on the go. With hundreds of channels of digital-quality TV and music to enjoy, traveling will never be the same! This User’s Guide provides all of the basic...
  • Page 3 TracVision Mobile Receiver User’s Guide Trademarks Software contained in the TracVision receiver and referenced in this manual is copyright ©1995-2006 by DIRECTV, Inc. Some features are patent KVH, TracVision, and DewShield are trademarks of KVH Industries, Inc. pending. WatchWizard, PreSelect, TurboTune, and OneLine Guide are trademarks of Hughes Network Systems.
  • Page 4 For your safety and protection, read this safety while you are driving a vehicle. WARNING! section carefully. TracVision is designed specifically to provide entertainment to passengers and Heed Cautions – Be sure to follow all cautions on the should never be connected to active video product and in the operating instructions.
  • Page 5 TracVision Mobile Receiver User’s Guide Federal Communications Commission (FCC) However there is no guarantee that interference will not occur in a particular Regulatory Information for Vehicle Use installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by removing and applying Declaration of Conformity –...
  • Page 6 Enter these numbers in the associated boxes on the red Activation Card. Before you can start watching satellite TV via TracVision, the receiver must be activated. Once your antenna system is fully installed, follow the steps Technical Support below to activate the receiver.
  • Page 7 TracVision Mobile Receiver User’s Guide Send Us Your Comments About This Manual If you have any comments regarding this manual, please e-mail them to manuals@kvh.com. Your feedback is greatly appreciated! 54-0376...

  • Page 8: Table Of Contents

    Table of Contents Table of Contents Overview of Onscreen Displays ..4.1 The Channel Banner ....4.3 The Program Guide ....4.4 Introduction .
  • Page 9 TracVision Mobile Receiver User’s Guide Using Access Controls ... . .7.1 Designating the Receiver as Primary or Secondary ..9.6 Locking & Unlocking the System ..7.3 Switching Satellites .

  • Page 10: Introduction

    Introduction 1 Introduction This section provides a basic overview of this manual and the TracVision system. It also explains the three essentials for good satellite TV reception. Contents Using this Manual ......1.3 System Overview .

  • Page 11: Using This Manual

    Format Conventions This manual uses the following typographical This manual provides complete instructions for conventions to help clarify instructions: operating your TracVision receiver. Throughout this manual, important information is marked for your Text Example Description attention by the following icons: ...the MUTE button.

  • Page 12: System Overview

    TracVision Mobile Receiver User’s Guide System Overview Receiver The receiver decodes Your TracVision system is a state-of-the-art, actively satellite TV signals stabilized antenna system that delivers live satellite from the antenna unit TV to your mobile audio/video entertainment and sends the signals system.

  • Page 13: Receiving Satellite Tv Signals

    Introduction Receiving Satellite TV Signals DIRECTV 101 Satellite Location Like a satellite dish used at home, the TracVision antenna needs a clear view of the DIRECTV ® satellite(s) to receive satellite TV signals. Consider the three essentials noted on the following pages to ensure trouble-free reception.
  • Page 14 TracVision Mobile Receiver User’s Guide Blockage Elevation Angle Since the TracVision antenna must have a clear view Since TV satellites are located above the equator, the of the DIRECTV satellite to receive satellite TV TracVision antenna needs to point toward the signals, anything that stands between the antenna southern sky to receive satellite TV signals.

  • Page 15: Getting Started

    2 Getting Started This section provides basic operation instructions, so you can quickly start using your TracVision system. Contents Turning On the Antenna ......2.3 Changing Channels .

  • Page 16: Turning On The Antenna

    TracVision system, follow the simple steps below. SAT button. Then press GUIDE the remote’s PWR button. 1. Apply power to the TracVision mobile receiver. MENU TURBO The receiver beeps twice, The Receiver status light should turn green.
  • Page 17 TracVision Mobile Receiver User’s Guide 5. If Message 2 does not appear after Message 1, Program Guide ensure that the antenna has a clear view of the satellite. The antenna requires an unobstructed view of the sky to receive satellite TV signals.* Once the antenna locks onto the satellite, the receiver starts downloading the program guide.

  • Page 18: Changing Channels

    Getting Started Turning Off the Antenna Changing Channels To turn off the antenna, follow the steps below: To change the channel, press the SAT button then select Press the remote any of the following options: control’s SAT button. The button should blink Press the CHANNEL GUIDE red.

  • Page 19: Using The Remote Control

    Using the Remote Control 3 Using the Remote Control This section explains how to use the remote control functions, program the remote to work with other components, and replace the remote control batteries. Contents Remote Control Functions ..... . .3.3 Programming the Remote Control to Operate Other Components .

  • Page 20: Remote Control Functions

    Using the Remote Control TracVision Remote Control Remote Control Functions Power On/Off Your system comes with an easy-to-use, backlit remote control that allows you to operate the receiver Component Select from virtually anywhere in the vehicle, day or night. GUIDE This page shows the locations and names of the remote control buttons.
  • Page 21 SAT button is currently selected, pressing the PWR button turns the TracVision antenna on/off (but receiver remains powered in standby). Press the SAT component select button to control the TracVision receiver. To GUIDE control a different component, press the associated component select button.
  • Page 22 Using the Remote Control Press the FAV button to view listings for your favorite channels. You can set up four different lists of favorite channels. Each press of the FAV button brings up the next favorite channel list. See Section 6-1, “Using Favorite Channel Lists,”...
  • Page 23 TracVision Mobile Receiver User’s Guide Press the CLEAR button to exit from any onscreen guide, remove banners, CLEAR or cancel an action. Use the VOLUME (VOL) button to raise or lower the volume on your TV. The remote control must be programmed to operate your TV for the VOLUME GUIDE button to work (see Section 3-2, “Programming the Remote Control to Operate...
  • Page 24 Using the Remote Control DIRECTOR The DIRECTOR buttons provide convenient shortcuts to the following PROG VIDEO functions: AUDIO SEARCH If the program guide is currently displayed, press the PROG button to use the program director, which allows you to program an event for viewing in advance.
  • Page 25 TracVision Mobile Receiver User’s Guide The INPUT button allows you to select a video feed from a different source INPUT connected to your TV, such as a VCR (if the TV component button is selected). The remote control must be programmed to operate your TV for the INPUT button to work (see Section 3-2, “Programming the Remote Control to...

  • Page 26: Programming The Remote Control

    (CH) button to step through the codes may be able to operate your TV, VCR, DVD, or AUX until the component turns off, components using your TracVision remote control. To indicating that you have found the program your remote control, follow the steps below.

  • Page 27: Controlling Multiple Receivers

    001 receiver, and the 001 remote cannot operate the 002 receiver. For details on ordering an additional TracVision receiver, please call or visit your local KVH authorized dealer/installer. To set a remote control and receiver to use a different Antenna remote ID, follow the steps below.

  • Page 28: Installing The Remote Control Batteries

    Using the Remote Control At the same time, press the MUTE button for two Installing the Remote Control seconds. Batteries Release both buttons. The SAT button should To install or replace the remote control’s batteries, remain lit. If it doesn’t, repeat Steps 7-9. follow the steps below.

  • Page 29: Overview Of Onscreen Displays

    Overview of Onscreen Displays 4 Overview of Onscreen Displays This section introduces the three types of onscreen displays: the Channel Banner, the Program Guide, and the Menu System. Contents The Channel Banner ......4.3 The Program Guide .

  • Page 30: The Channel Banner

    Overview of Onscreen Displays The Channel Banner Channel Banner Whenever you change channels while you are watching TV, the channel banner appears at the top of the screen. You can also display the channel banner MAIL by pressing the INFO button while watching TV. DTV:Watch Pay Per View Previews Here! The channel banner displays the following Movie.

  • Page 31: The Program Guide

    TracVision Mobile Receiver User’s Guide The Program Guide To display the program guide, press the GUIDE Program Guide button. You can also access the program guide from the menu system’s Program Guide tab. The program guide displays the following information: •...

  • Page 32: The Menu System

    Overview of Onscreen Displays Main Menu The Menu System To display the main menu, press the MENU button. The menu system gives you access to all system functions and settings. The common elements of all menus are noted below. The following icons appear in several menus: Toggle or Step - Press SELECT to toggle (switch) a setting from “on”...
  • Page 33 TracVision Mobile Receiver User’s Guide To move the highlight: Use the joystick to move the highlight within the menus. To select a menu item: Highlight the desired menu item and press the SELECT button to select a main menu item or execute an action.
  • Page 34 Overview of Onscreen Displays Main Menu Tab Screens Functions See Page: Program Guide Program Guide • View and modify the program guide Guide Options Theme • Filter the program guide by program category Times • Change the time period shown in the program guide Fav List •...
  • Page 35 TracVision Mobile Receiver User’s Guide Main Menu Tab Screens Functions See Page: Audio & Video Audio • Set default audio language and alternate audio language • Set left/right audio balance Video • Select screen ratio (4:3 or 16:9) • Center menus on your monitor (up/down and right/left) •...
  • Page 36 • Prepare a new access card 8.12 Upgrade • Display upgrade status and history 8.12 Antenna • View current settings • Turn DewShield on/off (TracVision R6 only) • Turn the beeper on/off • Designate the receiver as primary or secondary • Switch satellites 54-0376...

  • Page 37: Using Program Guides

    Using Program Guides 5 Using Program Guides This section explains how to select a program guide style, use the different guide features, and set guide preferences. Contents Program Guide Styles ......5.3 Using the Program Guide .

  • Page 38: Program Guide Styles

    Using Program Guides Program Guide Styles Selecting a Guide Style You can set up the program guide to present information using either of two styles: • Grid • Logo The following sections explain how to select a style and describe the features of each style. Selecting a Guide Style To select a guide style, follow the steps below.
  • Page 39 TracVision Mobile Receiver User’s Guide Logo Guide Grid Guide • Select your favorite channels, rather than • Easy to see what programs are available at a selecting specific programs. particular time. • Only current programming can be selected from •...

  • Page 40: Using The Program Guide

    Using Program Guides To view a program’s description: Using the Program Guide Press the INFO button for a full description of the To display the program guide: highlighted program. Press the GUIDE button to bring up the guide. To tune to a program: To move the highlight: Press the SELECT button to tune to a highlighted program.

  • Page 41: Using The Oneline Guide

    TracVision Mobile Receiver User’s Guide Using the OneLine Guide To show the OneLine Guide for a specific channel: Use the numeric keypad to enter the channel The OneLine Guide, which appears at the bottom of number to display the OneLine Guide for that your screen, displays a segment of the program channel.

  • Page 42: Using Turbotune For Quick Access To Favorite Channels

    Using Program Guides Using TurboTune for Quick Access Highlight a vacant channel box (shows “Add Channel”) and press SELECT. Or you can highlight to Favorite Channels an occupied box instead to overwrite its set channel with your new selection. The TurboTune feature gives you quick access to 27 of your favorite channels.
  • Page 43 TracVision Mobile Receiver User’s Guide Adding the Current Channel to TurboTune Selecting a Channel from TurboTune If you want to add the channel you’re currently To tune to a channel in TurboTune, follow the steps watching to TurboTune, follow the steps below.

  • Page 44: Setting Guide Preferences

    Using Program Guides Renaming TurboTune Groups Setting Guide Preferences You can rename each nine-channel TurboTune group The Guide Options menu allows you to customize the to anything you choose, using up to 10 letters, appearance and behavior of onscreen guides. numbers, spaces, etc.
  • Page 45 TracVision Mobile Receiver User’s Guide Multi-Color Highlight the menu button for the setting you wish to modify: Press SELECT to turn multi-color on/off. If turned on, program cells appear in different colors, based on Guide Style their type of content. The four colors are as follows: Press SELECT to choose either grid or logo style of program guide.
  • Page 46 Using Program Guides Filters Press SELECT to choose either temporary or persistent. If temporary, the filters you apply are active only while the program guide remains onscreen; once you exit the program guide, all filters are cleared. If persistent, the filters you apply remain active after you exit the program guide.

  • Page 47: Setting Favorites And Filters

    Setting Favorites and Filters 6 Setting Favorites and Filters This section explains how to set up lists of favorite channels, filter the program guide by category and time, and search for programs based on content. Contents Using Favorite Channel Lists .....6.3 Filtering the Program Guide .

  • Page 48: Using Favorite Channel Lists

    Setting Favorites and Filters Favorite List Setup Using Favorite Channel Lists Favorite channel lists help you organize the hundreds of available channels into more manageable groups. Each of the four lists can contain as many or as few channels as you wish. You can customize these groups in several ways.
  • Page 49 TracVision Mobile Receiver User’s Guide Switching Between Favorite Lists If the Family list has not had any channels added to it, and the receiver is locked, no Once you have created your favorite channel lists, use channels can be viewed without first the remote control’s FAV button to cycle through...
  • Page 50 Setting Favorites and Filters Generating an Auto Set List Renaming a Channel List 1. At the Favorite List Setup pane, highlight the The Auto Set function generates a complete list of Rename button and press SELECT. viewable channels. Auto Set may exclude some channels, such A Rename List menu appears.
  • Page 51 TracVision Mobile Receiver User’s Guide Finding New Channels Adding and Removing Channels Occasionally, new channels are added to the available To add or delete a channel from a selected favorite programming selections. The number of channels that channel list, follow the steps below.

  • Page 52: Filtering The Program Guide

    Setting Favorites and Filters Filtering the Program Guide Category Filter The Category Filter menu allows you to filter the program guide to show just those channels that match your viewing interests. To filter the guide by program categories, such as movies, sports, or news, follow the steps below.

  • Page 53: Selecting Guide Times

    TracVision Mobile Receiver User’s Guide Selecting Guide Times The Guide Times menu provides easy access to future Guide Times programming information. To advance the guide to a future day/time period, follow the steps below. 1. Press the GUIDE button twice while watching TV [or select the Guide Options tab from the main menu].

  • Page 54: Using Watchwizard To Search For Programs

    Setting Favorites and Filters WatchWizard Program Searches Using WatchWizard to Search for Programs WatchWizard allows you to search for programs using criteria such as rating, showtime, language, and category. You can even search for a specific word found in program titles or descriptions. WatchWizard can store up to eight separate searches using any combination of criteria and text.
  • Page 55 TracVision Mobile Receiver User’s Guide To enter text, use the onscreen keyboard (to enter a Viewing Search Results letter on the keyboard, highlight the letter and press To view a list of programs matching your search SELECT). Once you’ve entered the desired text, criteria, highlight the WWResult tab.
  • Page 56 Setting Favorites and Filters Using the Channels Search Channels Search You can also search for channels that offer a specific type of programming by using the category-based channels search. 1. Press the SEARCH button while watching TV [or select the WatchWizard tab from the main menu]. 2.

  • Page 57: Using Access Controls

    Using Access Controls 7 Using Access Controls This section explains how to lock and unlock the system using a passcode. It also explains how to set rating and time limits. Contents Locking & Unlocking the System ....7.3 Setting Ratings Limits .

  • Page 58: Locking & Unlocking The System

    Highlight the Lock & Limits tab and press control. SELECT. When you first install the TracVision receiver, it will Highlight the Lock tab to display the Parental be unlocked. That is, no limits or restrictions are in Lock pane.
  • Page 59 TracVision Mobile Receiver User’s Guide 5. The Lock System pop-up panel appears. Enter a Overriding the System Lock four-digit passcode using the remote control’s When the system is locked, inaccessible channels will numeric keypad. show a “limit exceeded” message. To temporarily override the system lock, follow the steps below.

  • Page 60: Setting Ratings Limits

    Using Access Controls Setting Ratings Limits Unlocking the System To remove the lock and all of its restrictions, follow Ratings help you to determine whether a program’s the steps below. content is appropriate for a particular audience. To select the maximum ratings limits that can be viewed 1.

  • Page 61: Setting Time Limits

    TracVision Mobile Receiver User’s Guide 4. Highlight the button for the type of programming Setting Time Limits you want to restrict and press SELECT. You can restrict your system to allow viewing only 5. Highlight the maximum rating you want to allow...
  • Page 62 From The Max Spending button is not applicable button and use the remote control’s numeric to your TracVision system. keypad to set the earliest time. Then highlight the Through button and set the latest time.

  • Page 63: Other Menu Functions

    Other Menu Functions 8 Other Menu Functions This section explains how to change audio/video settings, schedule future programs, and change system settings. Contents Adjusting Audio Settings ......8.3 Adjusting Video Settings .

  • Page 64: Adjusting Audio Settings

    Other Menu Functions Highlight the menu button for the setting you Adjusting Audio Settings wish to modify: From the Audio Adjustment menu, you can select Default Audio and Alternate Audio languages for default audio and alternate audio. You Your receiver supports alternate audio services. A can also adjust the left/right balance.
  • Page 65 TracVision Mobile Receiver User’s Guide To set up your default and alternate audio languages, To select the alternate audio when watching TV, follow the steps below. follow the steps below. ALT. 1. Press the AUDIO button to access the Audio...

  • Page 66: Adjusting Video Settings

    Other Menu Functions Adjusting Video Settings Highlight the menu button for the setting you wish to modify: From the Video Adjustment menu, you can set the screen’s aspect ratio and change the appearance of Screen Ratio onscreen displays. Press SELECT to choose either a 4:3 (standard) or 16:9 (widescreen) screen aspect ratio.

  • Page 67: Using The Program Director To Schedule Future Programs

    TracVision Mobile Receiver User’s Guide Using the Program Director to Scheduling an Event from the Program Director Schedule Future Programs To schedule a program from the Program Director menu, follow the steps below. The Program Director allows you to automatically Press the MENU button to access the main menu.
  • Page 68 Other Menu Functions 4. Highlight the Schedule Highlight the Start column and use the joystick Schedule Options to View button from the or numeric keypad to set the program’s start Schedule to View ( ) Schedule Options pop- time. Be sure to specify AM or PM (or N for Cancel up menu and press noon, M for midnight if you specified 12:00).

  • Page 69: Reading Mail From Directv

    TracVision Mobile Receiver User’s Guide Deleting a Scheduled Event Reading Mail from DIRECTV To cancel a scheduled event, follow the steps below. DIRECTV uses the Mail feature to send you important information, notify you of special events, Press the MENU button to access the main menu.

  • Page 70: Setting System Preferences

    Other Menu Functions View Mail Setting System Preferences The Preferences menu allows you to customize various system settings. To set system preferences, follow the steps below. Press the MENU button to access the main menu. Highlight the System Setup tab and press SELECT.
  • Page 71 TracVision Mobile Receiver User’s Guide Banner Style 4. Highlight the menu button for the setting you wish to modify: Press SELECT to choose either a Short or Full banner style. A full banner always shows the program Menu Language description within the channel banner; a short banner Press SELECT to choose either English (default) or shows just the program’s title.

  • Page 72: Advanced System Setup Functions

    Other Menu Functions Highlight the menu tab for the advanced function Advanced System Setup Functions you wish to use. Besides the Remote and Preferences menus described Install previously, the System Setup menu provides other The Antenna Setup pane offers three functions: functions, all of which are rarely, if ever, used.
  • Page 73 TracVision Mobile Receiver User’s Guide Info Upgrade The System Information pane lists general The Upgrade pane shows your receiver’s upgrade information about your TracVision receiver, including history. Occasionally, DIRECTV will automatically model, ID, access card, and software version. update your receiver’s software.

  • Page 74: Antenna Controls

    Antenna Controls 9 Antenna Controls This section explains how to control the TracVision antenna using the receiver’s onscreen menus. Contents Viewing Current Settings ......9.3 Turning DewShield On/Off .

  • Page 75: Viewing Current Settings

    Current Sat Name of satellite selected for tracking secondary receiver, only “Beeper” and “Receiver Type” settings are available. DewShield* Auto / Off Beeper On / Off Receiver Type Primary / Secondary * DewShield is only available with TracVision R6 systems. 54-0376...

  • Page 76: Turning Dewshield On/Off

    TracVision Mobile Receiver User’s Guide Turning DewShield On/Off TracVision R6 Systems Only The DewShield electronic dew elimination system Change Settings – DewShield (patent pending) keeps the antenna dome clear of dew, Antenna ensuring optimum reception of satellite TV signals Antenna Settings Antenna Controls (moisture weakens satellite signals).

  • Page 77: Turning The Beeper On/Off

    Antenna Controls Turning the Beeper On/Off The TracVision receiver beeps to indicate the status of Change Settings – Beeper the antenna. Antenna Antenna Settings 2 beeps = Antenna is powering on Antenna Controls Current Settings Modify Settings Cancel 1 beep = Antenna is powering off...

  • Page 78: Designating The Receiver As Primary Or Secondary

    Follow the steps below to designate the receiver as a primary or secondary receiver. Primary or Secondary Press the MENU button to access the main menu. Each TracVision mobile receiver must be designated Highlight the System Setup tab and press as either a primary or a secondary receiver. SELECT.
  • Page 79 Antenna Controls ANTENNA Light on Secondary Receivers 5. If you want to designate the receiver as the primary receiver, highlight Set Primary. If you The ANTENNA light on secondary receivers will want to designate the receiver as a secondary remain off at all times. Only the primary receiver can receiver, highlight Set Secondary.

  • Page 80: Switching Satellites

    TracVision Mobile Receiver User’s Guide Switching Satellites If your antenna system is configured for multiple Sat Select – Automatic satellites, you can easily switch between the available Antenna satellites either automatically or manually. Antenna Controls Antenna Settings Current Settings Modify Settings...
  • Page 81 Antenna Controls Manual Switching If you prefer, you can switch satellites manually from Sat Select – Manual the Sat Select menu. Antenna Antenna Controls Follow the steps below to manually switch to a Antenna Settings Current Settings Modify Settings different satellite. Diagnostics Sat Select Cancel...

  • Page 82: Changing The List Of Available Satellites

    TracVision Mobile Receiver User’s Guide Changing the List of Available Satellites If your antenna system supports multiple satellites, Antenna Setup you can choose which satellites will be active for your system. Follow the steps below to add or remove satellites from the list of supported satellites.

  • Page 83: 10 Troubleshooting

    Troubleshooting 10 Troubleshooting This section identifies basic problems along with their possible causes and solutions. It also explains what the status lights indicate, how to view diagnostic information, and how to get technical support. Contents 10-1 Five Simple Checks ......10.3 10-2 Troubleshooting Matrix .

  • Page 84: Five Simple Checks

    You can also try resetting the receiver: satellite reception. Clean the exterior of the dome 1. Stop in a blockage-free area. periodically. In addition, if you have a TracVision R6, keep DewShield set to AUTO to ensure optimum 2. Turn off the receiver’s power switch (on the front panel, not on the remote).

  • Page 85: Troubleshooting Matrix

    TracVision Mobile Receiver User’s Guide 10-2 Troubleshooting Matrix SYMPTOM System does not power on No video on TV screen Intermittent picture for short intervals System works at rest, but not on the move System does not find satellite System restarts itself...

  • Page 86: Causes And Solutions To Common Problems

    With the vehicle powered up and the receiver turned Power Switch on, power at the receiver must measure at least 10 VDC for the TracVision system to work properly. Check the receiver’s power connection and ensure that it is wired to a dedicated circuit. If other devices are wired to the same circuit, these additional loads might drain power away from the receiver.
  • Page 87 KVH’s Activation Department at 1-866-551-8004. Activation support is available Satellite Coverage Issue 24 hours a day, seven days a week. TracVision will provide good satellite TV reception throughout the entire satellite coverage area. However, signal quality can be degraded as you 10.6...
  • Page 88 1-800-DIRECTV (347-3288). You will need to provide you may have the wrong input selected on your your phone number. Be sure the TracVision system is audio/video system. Try switching to another input turned on, has a clear view of the sky, and is tuned to the (for example, VIDEO 1 or VIDEO 2;...
  • Page 89 TracVision Mobile Receiver User’s Guide Favorite Channel List Active Receiver Locked Up Since your receiver is a computing component, it is If a favorite channel list is active, only channels set up susceptible to erratic changes in power and/or signal, in that list are accessible.
  • Page 90 Troubleshooting Ground Loop Generating Electrical Noise RF Converter Too Close to Receiver The system’s audio cables might pick up the electrical The RF converter must be placed at least three feet noise or hum caused by a ground loop on the vehicle. away from the receiver.

  • Page 91: System Status Lights

    TracVision Mobile Receiver User’s Guide System Status Lights 10-4 System Status Lights Three status lights on the front of the receiver indicate the current status of the system and can help you identify problems. During normal operation, all three status lights should be lit green.
  • Page 92 Troubleshooting RECEIVER Light Indications Light is... Indicates Description Receiver is OFF (power switch is off) Green Receiver is ON Orange Standby Receiver is ON but antenna is turned OFF Orange, flashing* Overload Overload or short circuit detected on the antenna cable Fault Internal power fault ANTENNA Light Indications...

  • Page 93: Viewing Diagnostic Information

    TracVision Mobile Receiver User’s Guide Diagnostics 10-5 Viewing Diagnostic Information Antenna Follow the steps below to view diagnostics Antenna Controls Current Settings Modify Settings information on the receiver. Diagnostics Sat Select Using your primary receiver, press the MENU Receiver State: OK Antenna State: Tracking button to access the main menu.

  • Page 94: Viewing Serial Numbers

    The receiver and antenna serial numbers appear on Diagnostics Sat Select the screen. TracVision Receiver Ser #: 123456789 TracVision Antenna Ser #: 123456789 If you use this function on a secondary receiver, only the receiver serial number will appear on the screen.

  • Page 95: Viewing Software Versions

    SELECT. Antenna 5. Highlight Show SW Version and press SELECT. Antenna Controls Current Settings Modify Settings The TracVision software versions appear on the Diagnostics Sat Select screen. TracVision Software Versions: Receiver SW Version: DELUXE3 (Revision 4) Version 0.13 (Dec 21 2005 14:46:50) Antenna SW Version: 1.4;...

  • Page 96: Technical Support

    Technical Support If you experience an operating problem or require technical assistance, please contact your local authorized TracVision dealer/installer first. You can find an authorized technician near you by visiting our website at www.kvh.com/wheretogetservice. If an authorized dealer/installer is not located nearby, Detailed information on KVH’s global...

  • Page 97: Appendices

    Appendices Appendices This section provides wiring diagrams and notes for typical TracVision configurations and maps showing the DIRECTV ® satellites’ elevation angles off the horizon. Contents System Wiring Diagrams ......A.3 Elevation Maps .

  • Page 98: System Wiring Diagrams

    A.20 * The original receiver, bundled with the TracVision system, is required in all configurations. This primary receiver supplies power to the antenna. If your desired configuration is not shown here, please call KVH Technical Support at 401-847-3327 for assistance.
  • Page 99 TracVision Mobile Receiver User’s Guide Wiring Diagram for a Single TracVision Mobile Receiver To Antenna Black Ground Input Power (10-16 VDC) DC Power Receiver FUSE (8A) POWER (10-16V DC) Tested to comply This device complies with Part 15 of the FCC rules. Operation is subject...
  • Page 100 System Wiring Diagrams • If vehicle power fluctuates or is noisy, KVH Single TracVision Mobile Receiver recommends that you use an AC/DC power Audio/Video Connections supply (KVH P/N 72-0206-01) to connect power • To connect the receiver to the TV’s video input, to the receiver.
  • Page 101 TracVision Mobile Receiver User’s Guide Wiring Diagram for Two TracVision Mobile Receivers To Antenna Primary Mobile Receiver FUSE (8A) ANTENNA Splitter POWER (10-16V DC) Tested to comply This device complies with Part 15 of the FCC rules. Operation is subject...
  • Page 102 System Wiring Diagrams • The primary receiver supplies power to the Two TracVision Mobile Receivers antenna. It must be turned on in order to use the Components Required secondary receiver. • Splitter Kit, KVH P/N 72-0177 • Only the primary receiver can receive local •...
  • Page 103 TracVision Mobile Receiver User’s Guide Wiring Diagram for Three TracVision Mobile Receivers To Antenna Primary Mobile Receiver ANTENNA Splitter This receiver FUSE (8A) Tested to comply POWER (10-16V DC) This device complies with Part 15 of the FCC rules. Operation is subject...
  • Page 104 System Wiring Diagrams • Only the primary receiver can receive local Three TracVision Mobile Receivers channels (within the DMA used on your account). Components Required Remote Control for Secondary Receivers • Two Splitter Kits, KVH P/N 72-0177 • To avoid interference or “cross talk” between the •...
  • Page 105 TracVision Mobile Receiver User’s Guide Wiring Diagram for One TracVision Mobile Receiver and One Standard Home Receiver To Antenna Mobile Receiver This receiver FUSE (8A) POWER (10-16V DC) Tested to comply This device complies with Part 15 of the FCC rules. Operation is subject...
  • Page 106 Why Do I Need a Destacker? • The output of the TracVision antenna is a special stacked signal, which the TracVision mobile receiver is configured to decode. Since all standard home receivers are configured to decode unstacked signals, a destacker is needed to convert the antenna’s stacked signal into an...
  • Page 107 TracVision Mobile Receiver User’s Guide Wiring Diagram for One TracVision Mobile Receiver and Two Standard Home Receivers To Antenna Mobile Receiver This receiver FUSE (8A) Tested to comply This device complies with Part 15 of the FCC rules. Operation is subject...
  • Page 108 Why Do I Need a Dual-output Destacker? • The output of the TracVision antenna is a special stacked signal, which the TracVision mobile receiver is configured to decode. Since all standard home receivers are configured to decode unstacked signals, a dual-output destacker is needed to convert the antenna’s stacked signal...
  • Page 109 TracVision Mobile Receiver User’s Guide Wiring Diagram for Two TracVision Mobile Receivers and One Standard Home Receiver To Antenna Primary Mobile Receiver ANTENNA This receiver Splitter FUSE (8A) POWER (10-16V DC) Tested to comply This device complies with Part 15 of the FCC rules. Operation is subject...
  • Page 110 A.7 for details. Why Do I Need a Destacker? • The output of the TracVision antenna is a special stacked signal, which the TracVision mobile receiver is configured to decode. Since all standard home receivers are configured to decode unstacked signals, a destacker is needed to convert the antenna’s stacked signal into an...
  • Page 111 TracVision Mobile Receiver User’s Guide Wiring Diagram for One TracVision Mobile Receiver and One Digital Video Recorder (DVR) To Antenna Mobile Receiver This receiver FUSE (8A) Tested to comply POWER (10-16V DC) This device complies with Part 15 of the FCC rules. Operation is subject...
  • Page 112 For example, if • Destacker, Dual-output, KVH P/N 19-0410 your mobile receiver is tuned to a channel on the • The special splitter included in the Splitter Kit 119 satellite, you would not be able to record a permits communications between the antenna program on the 101 satellite.
  • Page 113 TracVision Mobile Receiver User’s Guide Wiring Diagram for One TracVision Mobile Receiver, One Standard Home Receiver, and One Digital Video Recorder (DVR) To Antenna Mobile Receiver This receiver FUSE (8A) POWER (10-16V DC) Tested to comply This device complies with Part 15 of the FCC rules. Operation is subject...
  • Page 114 Why Do I Need a Dual-output Destacker? provide the necessary amplification. • The multiswitch requires two unstacked inputs. Since the output of the TracVision antenna is a Local Channels stacked signal, the dual-output destacker is used • Only the primary mobile receiver can receive to split the signal into two unstacked signals.
  • Page 115 TracVision Mobile Receiver User’s Guide Wiring Diagram for Two TracVision Mobile Receivers and One Digital Video Recorder (DVR) To Antenna Primary Mobile Receiver ANTENNA This receiver Splitter FUSE (8A) POWER (10-16V DC) Tested to comply This device complies with Part 15 of the FCC rules. Operation is subject...
  • Page 116 For example, if shelf splitter will not work. your mobile receiver is tuned to a channel on the 119 satellite, you would not be able to record a Why Do I Need a Dual-output Destacker? program on the 101 satellite.

  • Page 117: Elevation Maps

    Elevation Maps Appendix B Elevation Maps Elevation Map for Satellite 101 Satellite at Equator A.23 54-0376...
  • Page 118 TracVision Mobile Receiver User’s Guide Elevation Map for Satellite 110 Satellite at Equator A.24 54-0376...
  • Page 119 Elevation Maps Elevation Map for Satellite 119 Satellite at Equator A.25 54-0376...
  • Page 120 TracVision Mobile Receiver User’s Guide Elevation Map for Satellite 72.5 Satellite at Equator A.26 54-0376...
  • Page 121 Index Index status, 10.12 blockage, 1.6, 10.3 turn on, 2.3 buttons, remote control, 3.3-3.8 turn off, 2.5 APG load type, 8.10 access card, 8.12 cable status, 10.12 arrows, in program guide, 5.5 accessories, A.3 cabling diagrams, A.3 aspect ratio, 8.5 AC/DC power supply, A.5 Category Filter, 6.7 audio adjustment, 8.3-8.4...
  • Page 122 TracVision Mobile Receiver User’s Guide connecting additional receivers, A.3- diagram, system, 1.4 filter the program guide, 6.7-6.8 A.21 digital video recorder (DVR), A.16-A.21 footprint, satellite, 1.5 connecting a DVR, A.16-A.21 DIRECTOR buttons, 3.7 fuse, 10.5 connectors, receiver, A.4 DIRECTV customer service, 7.4 future programs, 6.8...
  • Page 123 Index lights menu color scheme, 8.5 Voltage, 10.10 ice on antenna, 10.6 menu elements, 4.5 Receiver, 10.10-10.11 icons, channel banner, 4.3 menu functions, table, 4.7-4.9 Antenna, 10.10-10.11 icons, menu, 4.5 menu system, 4.5-4.6 limit exceeded message, 7.4 INFO button, 3.5 moisture on antenna, 10.3 limit access, 7.3-7.7 initialize a new access card, 8.12...
  • Page 124 TracVision Mobile Receiver User’s Guide download, 2.4 multiple, A.3-A.21 filter, 6.7 order additional, 3.10 part numbers, accessories, A.3 future programs, 6.8 power switch, 2.3 passcode, 7.4 load type, 8.10 primary, 9.6, A.7 picture-in-guide, 4.4, 5.10 preferences, 5.9-5.11 repair, 10.9 power indications, 10.10, 10.12 styles, 5.3-5.4...
  • Page 125 Index remote control ID, change, 3.10-3.11 location, 1.5 software versions, 10.14 supported, 9.10 repairs, 10.9 sort the program guide, 5.10 switch, 9.8-9.9 replace batteries, 3.11 spending limit, 7.7 scan for satellites, 8.11 reset system, 10.3 splitter, A.6-A.21 schedule programs, 8.6-8.8 RF converter stacked signal, A.11 SEARCH button, 3.7...
  • Page 126 TracVision Mobile Receiver User’s Guide troubleshoot, 10.1 VOL button, 3.6 troubleshooting matrix, 10.4 Voltage light, 10.10 TURBO button, 3.4 volume, 3.6 TurboTune, 5.7-5.9 turn beeper on/off, 9.5 WatchWizard, 6.9-6.11 turn DewShield on/off, 9.4 weak signal, 10.6 turn off the system, 2.5 weather, inclement, 10.3...
  • Page 127 • 50 Enterprise Center • Middletown, RI 02842-5279 U.S.A . • Phone: (401) 847-3327 • Fax: (401) 849-0045 • E-mail: info@kvh.com © Copyright 2006, KVH Industries, Inc. DIRECTV is a registered trademark of DIRECTV, Inc. KVH, TracVision, and DewShield are official trademarks of KVH Industries, Inc.

Table of Contents