Adjusting The Display Brightness; Setting The Room Code - Bose Wave Owner's Manual

Personalising Your Wave

Adjusting the display brightness

Setting the room code

24
®
Music System
The brightness level of the display automatically adjusts itself for low and high ambient light
conditions. This feature brightens the display for better visibility in high ambient light
conditions and dims the display making it less intrusive in low ambient light conditions. High
and low brightness settings can be set independently.
1. Press and hold Alarm Time (Menu) until -SETUP MENU- is displayed.
>
2. Press Tune/MP3 five times until BRIGHT HI- is displayed.
3. Press Time – or Time + to set the high display brightness level to a value from 8-15.
>
4. Press Tune/MP3 once until BRIGHT LO- is displayed.
5. Press Time – or Time + to set the low display brightness level from 1-8.
6. Press Alarm Time (Menu) to exit the set-up menu or wait 10 seconds for the
set-up menu to end automatically.
Your Wave ® music system comes from the factory ready to operate as a second room (room
code B) when connected to a Bose
®
Wave music system with your Lifestyle
change the room code to match that of the remote control you are using for that room.
Refer to your Lifestyle ® system operating guide for more information on room codes.
1. Press and hold Alarm Time (Menu) until -SETUP MENU- is displayed.
>
2. Press Tune/MP3 seven times until ROOM- B
following the room letter indicate how the microswitches should be set on the Lifestyle
remote control. See your Lifestyle
3. Press Time – or Time + to select a room code other than room B.
4. Press Alarm Time (Menu) to exit the set-up menu or wait 10 seconds for the set-up
menu to end automatically.
® link enabled Lifestyle ® system. If you want to use your
®
system beyond a second room you will need to
®
system operating guide for details.
is displayed. The dashes
®