Battery Information - G-Tec AP160LCD User Manual

Load Information

Battery Information

UPS status Information
Indicates the frequency value of the UPS output
voltage, which could be displayed from 0 to 99Hz
Indicates the UPS output current value, which
could be displayed from 0 to 99.9A
Indicates the load or the UPS output is short and
the UPS would shut down
Indicates the load is over the SPEC range
Indicates the load percent, and the lowest grid
represent 30% load, the two low grids represent
60% load, the three low grids represent 90% load,
all the grids represent 100% load.
Indicates the battery voltage value, which could
be displayed from 0 to 999Vdc
Indicates the battery current value, which could be
displayed from 0 to 99.9A
Indicates the battery capacitance percent, and
every grid represent 25% capacitance. All the
grids represent 100% capacitance.
Indicates the UPS is working in the battery mode,
and the battery is discharged for supplying the
load
Indicates the battery is being charged
Indicates the battery is over charged, and the
UPS would be switched to Battery mode
Indicates the battery is weak, and the UPS would
shut down soon
Indicates some the warning or fault occur in the
UPS, fault code or warning code could be
displayed, and the codes are illuminated in detail
in the following chapter
9