Command List; Communications Protocol - Epson EB-X24 User Manual

Monitoring and Controlling
c
Connect the computer's USB port to the projector's USB-B port
with a USB cable.
Start from step 2 from the second time.

Command list

When the power ON command is transmitted to the projector, the power
turns on and it enters warm-up mode. When the projector's power has
turned on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and
returns a ":", and then accepts the next command.
If the command being processed terminates abnormally, an error message is
output and a ":" is returned.
Item
Power ON/OFF On
Off
Signal selection Computer
HDMI
Video
S-Video
USB Display
USB
LAN
A/V Mute On/Off On
Off
A/V Mute selection Black
Blue
Command
PWR ON
PWR OFF
Auto SOURCE 1F
RGB SOURCE 11
Component SOURCE 14
SOURCE 30
SOURCE 41
SOURCE 42
SOURCE 51
SOURCE 52
SOURCE 53
MUTE ON
MUTE OFF
MSEL 00
MSEL 01
Item
Logo
Add a Carriage Return (CR) code (0Dh) to the end of each command and
transmit.

Communications protocol

• Default baud rate setting: 9600 bps
• Data length: 8 bit
• Parity: None
• Stop-bit: 1 bit
• Flow control: None
69
Command
MSEL 02