Removing And Installing Components During Servicing; Notes On Installing And Removing Boards And Components; Hard Disk - Fujitsu Lifebook PH530 Operating Manual

Removing and installing components during servicing

Removing and installing components
during servicing
Only qualified technicians should repair your notebook. Unauthorised
opening or incorrect repair may greatly endanger the user (electric shock,
fire risk) and will invalidate your warranty.
Servicing
Components
After consulting the Hotline/Service Desk, you may remove and install the
components described in this chapter yourself.
If you remove and install components without consulting the Hotline/Service
Desk, then the warranty of your notebook will be voided.
Notes on installing and removing boards
and components
• Switch the notebook off and pull the power plug out of the mains socket.
• Always remove the battery.
• Take care when you use the locking mechanisms on the battery and any other component.
• Never use sharp objects such as screwdrivers, scissors or knives as leverage to remove covers.
Board Notes ESD Boards with electrostatic sensitive devices (ESD) are marked with the label
shown.
When handling boards fitted with ESDs, you must always observe the following
points:
•
•
•
•
•

Hard disk

Installation and removal of the hard disk must only be carried out by authorized personnel
from our Fujitsu Service Partners. If you remove or install the hard disk yourself, this can
lead to significant risks for the user (electrical shock, fire hazard) and to impairment of the
functionality of your device. Unauthorized installation or removal will void the Warranty.
46
You must always discharge static build up (e.g. by touching a grounded
object) before working.
The equipment and tools you use must be free of static charges.
Remove the power plug from the mains supply before inserting or removing
boards containing ESDs.
Always hold boards with ESDs by their edges.
Never touch pins or conductors on boards fitted with ESDs.
Fujitsu Technology Solutions