Installing The Switch Without The Rack; Installing The Switch In A Rack - D-Link DES-1048 User Manual

D-Link DES-1048 Unmanaged Layer 2 Ethernet Switch

Installing the Switch Without the Rack

When installing the Switch on a desktop or shelf, the rubber feet included with the Switch should first be
attached. Attach these cushioning feet on the bottom at each corner of the device. Allow enough ventilation
space between the Switch and any other objects in the vicinity.
Figure 2-1. Prepare Switch for installation on a desktop or shelf

Installing the Switch in a Rack

The Switch can be mounted in a standard 19" rack. Use the following diagrams to guide you.
Figure 2-2. Fasten mounting brackets to Switch
Fasten the mounting brackets to the Switch using the screws provided. With the brackets attached securely, you
can mount the Switch in a standard rack as shown in Figure 2-3 on the following page.
6