EtherNet/IP-DeviceNet Router
1-1-2
Monitoring DeviceNet or DeviceNet Safety Systems via Ethernet
from Controllers Made by Other Manufacturers
Safety controls can be monitored by accessing
devices on the DeviceNet Safety network using the
UDP service from a general-purpose controller on
the Ethernet network (e.g., a PLC or computer).
Command via UDP
ED Router
(NE1A-EDR01)
Devices on a DeviceNet or DeviceNet Safety network can be accessed from
general-purpose controllers (e.g., PLCs or computers) in an Ethernet network
using the UDP service.
This enables monitoring a DeviceNet or DeviceNet Safety control system via
Ethernet from a machine controller or monitor computer that does not support
a DeviceNet interface. This can be used to easily add a DeviceNet Safety con-
trol system to an existing system.
PLC (OMRON or other maker)
OR
Ethernet
Socket service (UDP)
Command via UDP
DeviceNet Safety
DeviceNet Safety
DST1-series Slaves
Computer
Section 1-1
NE1A Safety Network Controller
DeviceNet Safety
DeviceNet Safety
DST1-series Slaves
3