Operating Navigation With Xm Ready; Getting Started - Audiovox ADV800XM User Manual

Power On/Off
Slide Switch
Figure 1B. ADV800XM Controls, Indicators and Connectors
Note: To prolong battery life, make sure the Power On/Off slide switch is in the Off position whenever
the unit is not in use or is being moved to another location or vehicle.
2. Operating Navigation with XM
Navigation with XM® Ready is designed for easy operation. Consistent with these criteria, a minimum of
hardware buttons is used on the ADV800XM; these consist of the Home button, Power On/Off slide switch
and the Volume control. The remaining controls are operated by touching the LCD screen to access
submenus pertaining to the various operating modes and their submenus and lists.
3.

Getting Started

To initialize ADV800XM operation, proceed as follows:
a. Connect the adapter power cord to a power source (home, car adapter); then plug the adapter
DC power connector into the DC connector on the right side of the unit.
b. If the XM® receiver is to be used, connect the XM antenna cable to the XM ANT connector on
the rear left side of the unit.
c. Adjust the tilt, angle and horizontal position of the unit to suit your personal preference.
Note: If the unit is being turned on for the first time, or after a prolonged period of not being
used, perform step d; otherwise, perform step e.
d. On the bottom of the unit, on the right side, position the power On/Off slide switch to the On
position to initially turn on the unit; the ADVENT logo appears on the screen for about 10
seconds, after which the operational modes default display appears.
BOTTOM
Input/Output Connector for
Optional Cradle Docking
®
Ready
6