Table of Contents
Advertisement
b. Plug the external XM antenna cable into the XM ANT jack at the rear of the unit
and set the Power On/Off slide switch to the On position. If the antenna is faulty
or improperly connected, the following message appears on the display:
Figure 6. Check Antenna Warning Display Message
3.
Note Your ID Number
a. When the operational modes default display appears, press the XM READY
toolbox button on the LCD touch screen; the XM READY logo appears for 10
seconds, followed by the XM default screen.
b. Select Channel 0 using the CH Up (
screen. The XM Mini tuner's eight-digit XM Satellite Radio ID number will appear
on the display. Write the number here:
4.
Activate Your Satellite Radio Service
) or Down (
10
) buttons on the touch
Advertisement
Table of Contents
