Table of Contents
Advertisement
2. Press the PRESET button just below the preset bank button; the preset channel
appears on the display as shown above.
3. Pressing any of the number buttons (0-9) will recall the stored channel.
4. Press the SELECT button to recall the preset channel, which then begins to play.
d.
Direct Channel Number Entry
To enter a channel using the direct method:
1.
Toggle the
display.
2.
Press CH-NUM button; the direct entry keypad appears on the display.
3.
Enter the desired channel number using the keypad and then press ENTER.
4.
When the channel number has been entered, the selected channel automatically
plays.
Figure 11. Direct Method Display For Channel Selection
Table 3. Preset Mode Function Button Summary
~
Jump Button
The JUMP button, when pressed, allows you to immediately return to the previous channel, or
alternately jump between the previous and current channel.
or
button until
,
Exit preset mode
Keypad buttons
Store preset channel numbers
Recalling preset channel numbers into memory
15
appears on the default
Advertisement
Table of Contents
