Porter-Cable PCV2500 Instruction Manual page 7

1. To Assemble Quick Connect
Grommets:
a. Squeeze grommet and place
into hole, fitting groove to
rim.
b. Push grommet into place.
c. Repeat steps until all
grommets are assembled.
2. To Assemble Quick Connect
Nozzles:
a. Remove four
colored quick
connect
nozzles from
plastic bag and
insert them
into correct
grommet.
NOTE:
Nozzles are color coded to
match colored nozzles on
panel.
ASSEMBLY INSTRUCTIONS
3. Place handle assembly onto
frame, depress the snap buttons,
and slide the handle assembly
onto the frame until snap buttons
snap into place.
4. Connect wand to gun. Tighten
securely.
5. Attach high pressure hose to
gun. Tighten securely.
6. Add engine oil (supplied)
to engine. Refer to Engine
Owners Manual supplied by
engine manufacturer for correct
procedure.
NOTE: There will be a slight amount
of oil in the engine from factory
testing.
NOTE: The pump on this unit is
maintenance free and requires no oil,
if there is a problem with the pump
contact an Authorized Service Center.
7- ENG
A07242