American Standard ASYSTAT300C Owner's Manual page 54

4. Press Heat/Cool Settings to make
Heat/Cool
selections for the opposite system
Settings
setting (either Heat or Cool).
NOTE: If your system is set for
Heat, only the heating
temperature will be used.
Similarly, if your system is
set for Cool, only the cooling
temperature will be used. If
your system is set for Auto,
either the heating or cooling
temperature may be used
depending on the tempera-
ture of the room.
Set Program
Mon Tue Wed Thu Fri Sat Sun
Wake
By pressing Heat/Cool Settings, you select the cooling system (if you
already set the heating temperature). The current setting displays.
Example display shows the cooling system was previously set for 78°.
54
Setting
AM
Cool
Pub. No. 12-5027-01
Fan
Auto
M14603
69-1615