Table of Contents
Advertisement
Memory module
Description
2-GB memory module (PC3, 12800, 1600-MHz)
2-GB memory module (PC3, 10600, 1333-MHz)
Before removing the memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the service cover (see
Remove the memory module:
1.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The memory module tilts up.)
2.
Remove the memory module (2) by pulling it away from the slot at an angle.
Reverse this procedure to install the memory module.
Battery on page
34).
WLAN module on page
Spare part number
652972-001
621565-001
36).
Component replacement procedures
41
Advertisement
Table of Contents
