Download Print this page
Onkyo SKF-4800 Instruction Manual

Onkyo SKF-4800 Instruction Manual

Speaker system

Advertisement

Quick Links

Speaker System
SKF-4800
Instruction Manual
Thank you for your purchase of the Onkyo speaker
system.
Please read this manual thoroughly before using it.
Following the instructions in this manual will
enable you to obtain optimum performance and
listening enjoyment from your new speaker
system.
Please retain this manual for future reference.
Before using this unit
• The speaker cabinet is made of wood and is
therefore sensitive to extreme temperatures and
humidity. Avoid placing the speaker systems in
locations subjected to direct sunlight, or in smoky
or in humid places, such as near an air conditioner,
humidifier, bathroom, or kitchen. Doing so may
result in damage to the speaker.
• Place the unit on a rigid, level surface. Placing it
on a slanted surface or weak base not only may
cause the unit to fall, but also results in decreased
sound quality.
• Be sure to turn off your amplifier before
connecting the speaker system. Connecting them
with the amplifier's power on may result in
damage to the amplifier or the speaker system.
• Keep water or other liquids away from the unit. If
water is spilled into the unit, not only the unit but
also the speakers themselves may be damaged.
Precaution on use
• This speaker system can handle the specified
input power when it is used for ordinary music
reproduction. If the following abnormal signals
are fed to the speaker, however, an overcurrent
may flow in the internal circuits, causing burning
or breakage of the wires even if the input power is
below the specified rating.
1. Noise produced when FM station is not tuned in
2. Sound produced when fast-forwarding cassette
tape deck
3. High-frequency sound generated by an
oscillator, an electronic musical instrument, etc.
4. Oscillating amplifier signals
5. Special test signals produced by audio checking
CD, etc.
6. Sound produced when connecting or
disconnecting audio connection cables (Always
turn off the amplifier's power before connecting
or disconnecting cables.)
7. Howling when a microphone is used
• Do not place magnetic objects such as
screwdrivers and iron parts near the tweeter since
they use speakers with strong magnets. Otherwise,
the objects may be attracted, causing injury or
damaging the diaphragm.
E
n

Advertisement

loading
Need help?

Need help?

Do you have a question about the SKF-4800 and is the answer not in the manual?

Questions and answers

Summary of Contents for Onkyo SKF-4800

  • Page 1 Avoid placing the speaker systems in locations subjected to direct sunlight, or in smoky or in humid places, such as near an air conditioner, SKF-4800 humidifier, bathroom, or kitchen. Doing so may result in damage to the speaker. • Place the unit on a rigid, level surface. Placing it...
  • Page 2 3. Fasten the terminal screw. strength of the reproduced bass by the position of the speakers. • In many rooms, the furniture and wall affect the SKF-4800 SKF-4800 reproduced sound quality. For stereo sound Front right speaker Front left speaker reproduction, placing the Right and Left speakers in the same condition produces the best results.
  • Page 3 If a speaker system is used near Bottom of the them, therefore, discoloration or distortion of pictures SKF-4800 will occur. Try moving the speakers away from your TV sets. If discoloration should occur, turn off your TV...
  • Page 4 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8023 Fax: 072-831-8163 http://www.onkyo.com/ 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 800-229-1687, 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.eu.onkyo.com/ The Coach House 81A High Street, Marlow, Buckinghamshire, SL7 1AB, UK Tel: +44-(0)1628-473-350 Fax: +44-(0)1628-401-700 Unit 1033, 10/F, Star House, No 3, Salisbury Road, Tsim Sha Tsui Kowloon, Hong Kong.