Page 1
Solo Quiet Mini Tower Case User’s Manual Manuel de l’utilisateur Anwenderhandbuch Manuale per l’operatore Manual del usuario...
Page 2
Solo by itself will not make a loud system quiet. Its design can reduce the noise emitted by any system, but for a truly Quiet Computing™ experience you should exercise care in choosing the components used in your system.
Page 3
If it does not match this Intel standard, please call Antec customer service at (800) 22ANTEC (North America) or +31 (0) 10 462-2060 Europe) to buy a USB adapter. This adapter will allow you to con-...
Page 4
If you intend to connect the front FireWire port to an IEEE 1394 add-on card that comes with an external-type IEEE1394 connector, please call Antec customer service at (800) 22ANTEC (North America) or +31 (0) 10 462-2060 (Europe) to buy an adapter. This adapter will allow you to connect the front IEEE 1394 port to the external-type connector.
Page 5
Connecting the Audio Ports There is an Intel standard 10-pin connector (with 7 individual wires with connec- tors) coming out from the front panel speaker and microphone connection. If the motherboard supports Intel’s standard onboard audio connector, you can plug in the 10-pin connector directly onto the board.
Page 6
The Suspension Mount This is the ultimate hard disk mounting solution to reduce the hard drive noise. There are three sets of Suspenders inside the cage to mount three hard drives. Each hard drive needs two Suspenders (front and rear) to mount it. Note: please DO NOT transport your system with your hard disks in mounted suspension.
Page 7
You can install two 92 mm fans to the fan cage in front of the internal 3.5” drives. These fans must be installed so that the air is blowing into the case. We recommend using Antec 92 mm TriCool™ fans to balance quiet performance with maximum cooling. See our web site for product information. Note: Please choose your fan speed wisely.
Need help?
Do you have a question about the Solo and is the answer not in the manual?
Questions and answers