Teac CR-H250 Owner's Manual page 9

H
PAUSE (J), FUNCTION, FM MODE
In CD mode, use this button to pause playback.
In DAB mode, activates features such as station
order, manual tune, DRC value, SW version
indication, signal error rate. It is also possible to
'tidy' the station list to remove stations which are in
the memory but have no service provided.
In FM mode, use this button to select stereo or
monaural.
I PLAY (y), BAND
In CD mode, use this button to start playback.
In TUNER mode, use this button to select FM, AM
or DAB.
J TUNING MODE, ENTER/SET
In FM or AM mode, use this button to select the
tuning mode.
In DAB mode, use this button to enter the
selection.
While setting the timer or the clock, use this button
to set the time.
K
PROGRAM, MEMORY
In CD mode, use this button to enter the program
mode. In program mode, use this button to enter
the selection.
In TUNER mode, use this button to memory the
station manually.
L
TIMER
Use this button to turn on or off the timer function.
M TIME MODE
Use this button to adjust clock and to set timer.
N TONE, BAL, DIMMER
Use this button to adjust the tone, balance and
dimmer together with the VOLUME/SELECT knob.
O
Input selector
Use these buttons to select a source.
P PHONES
For private listening, insert the headphones plug
into this jack, and adjust the volume by turning the
VOLUME/SELECT knob.
Q
POWER
Press this button to turn the unit on or standby.
The standby indicator lights when the unit is in the
standby mode. When the unit is turned on, it goes
off.
The equipment draws nominal non-operating
power from the AC outlet with its POWER switch
in the STANDBY position.
If the R-H300mk is connected to the CR-H250
@
with a remote control cord, you can switch
ON/standby both the CR-H250 and the R-H300mk
by pressing the POWER button of the CR-H250.
@
9