Teac CR-H250 Owner's Manual page 5

VCR, DVD, etc.
E
C
TAPE/AUX jacks
Make sure to connect:
white plug q white jack (L: left channel)
red plug q red jack (R: right channel)
< Be sure to insert each plug securely. To prevent
hum and noise, do not bundle the connection
cords with the power cord or speaker cord.
D
DIGITAL OUT terminal
Connect the component with an optical cable.
DIGITAL OUT w DIGITAL IN (MD, etc.)
< When inserting the plug of the optical cable, the
protective shutter of the terminal will open and
you should hear it click into position when fully
inserted. Be careful that you do not force the
plug, because this could result in damage to the
protective shutter, the cable, or the unit itself.
MD, CD-R, etc.
LINE DIGITAL IN LINE
OUT (OPTICAL) OUT
R L L R
D
E
AC Power Cord
Plug this AC power cord into an AC wall socket.
F
REMOTE CONTROL jack
< You can use the system remote control unit RC-
956 (provided with this unit) to operate TEAC R-
H300mk
Connect the REMOTE CONTROL jack (A or B) to
the REMOTE CONTROL jack (A or B) of R-
H300mk
cord.
Note:
The remote control connection cord is not
provided with this unit.
Cassette Deck (R-H300mk@)
LINE LINE
LINE
IN OUT
IN
L R L R L R
C
.
@
with the remote control connection
@
REMOTE
CONTROL
F
5