Grill King Owner's Manual page 36

Step 25
Remove two M4 bolts and spring
washers from the side burner valve.
Insert the side burner valve stem
assembly through the hole in the
side burner front panel (#6) , then
firmly seat the valve nozzle into the
burner venturi. Hold in place while
you perform Step 26.
WARNING: Never use your grill
without leak testing all
gas connections and
hoses. See the section
on "Leak Testing" in
this manual for proper
procedures.
(See page 8)
Step 26
Place the side burner bezel (#10)
over the side burner valve stem and
position over holes in side burner
front panel (#6) and side burner
valve assembly. Attach with two
M4 X 10mm bolts with spring
washers which come with valve.
Then install the side burner control
knob (#9) onto valve stem.
35
Side
Burner
Valve
Valve
Nozzle
Side Burner
Control Knob
Burner Venturi
Bezel