1. Manuals
  2. Brands
  3. Grill King Manuals
  4. Grill
  5. Grill King
  6. Owner's manual

Grill King Owner's Manual

Stainless steel gas grill
Hide thumbs
Table of Contents

Advertisement

Quick Links

Stainless Steel Gas Grill
Parrilla de Gas de Acero Inoxidable
OWNER'S MANUAL / MANUAL DEL PROPIETARIO
GUARDE ESTE MANUAL PARA REFERENCIA FUTURA
NOTICE TO INSTALLER:
LEAVE THESE INSTRUCTIONS
WITH THE GRILL OWNER FOR
FUTURE REFERENCE.
AVISO PARA EL
INSTALADOR:
ENTREGUE ESTAS
INSTRUCCIONES AL
PROPIETARIO DE LA PARRILLA
PARA REFERENCIA FUTURA.
Customer Service
(800) 527-0717
ASSEMBLY AND OPERATING INSTRUCTIONS
INSTRUCCIONES DE ARMADO Y OPERACIÓN
SAVE THIS MANUAL FOR FUTURE REFERENCE
HAZARDOUS EXPLOSION MAY RESULT IF THESE WARNINGS AND INSTRUCTIONS
ARE IGNORED. READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS IN THIS
MANUAL TO AVOID PERSONAL INJURY, INCLUDING DEATH OR PROPERTY DAMAGE.
SE PUEDE PRODUCIR UNA EXPLOSIÓN PELIGROSA SI SE HACE CASO OMISO A
ESTAS ADVERTENCIAS E INSTRUCCIONES. LEA Y SIGA TODAS LAS ADVERTENCIAS
E INSTRUCCIONES EN ESTE MANUAL PARA EVITAR LESIONES PERSONALES,
WARNING/ADVERTENCIA
INCLUSO LA MUERTE, O LOS DAÑOS MATERIALES.

Advertisement

Table of Contents
loading

Related Manuals for Grill King Grill King

Summary of Contents for Grill King Grill King

  • Page 1 Stainless Steel Gas Grill Parrilla de Gas de Acero Inoxidable OWNER’S MANUAL / MANUAL DEL PROPIETARIO ASSEMBLY AND OPERATING INSTRUCTIONS INSTRUCCIONES DE ARMADO Y OPERACIÓN SAVE THIS MANUAL FOR FUTURE REFERENCE GUARDE ESTE MANUAL PARA REFERENCIA FUTURA WARNING/ADVERTENCIA NOTICE TO INSTALLER: HAZARDOUS EXPLOSION MAY RESULT IF THESE WARNINGS AND INSTRUCTIONS LEAVE THESE INSTRUCTIONS ARE IGNORED.
  • Page 2 IMPORTANT SAFETY WARNINGS WE WANT YOU TO ASSEMBLE AND USE YOUR GRILL AS SAFELY AS POSSIBLE. THE PURPOSE OF THIS SAFETY ALERT SYMBOL IS TO ATTRACT YOUR ATTENTION TO POSSIBLE HAZARDS AS YOU ASSEMBLE AND USE YOUR GRILL. WHEN YOU SEE THE SAFETY ALERT SYMBOL PAY CLOSE ATTENTION TO THE INFORMATION WHICH FOLLOWS! READ ALL SAFETY WARNINGS AND INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING AND OPERATING YOUR GRILL.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS General Warnings ..........3 Installation and LP Cylinder Specifications and Safe Use.

  • Page 4: General Warnings

    GENERAL WARNINGS WARNING • Never use natural gas in a unit designed for liquid propane gas. • Never use charcoal or wood briquets in a gas grill. Flavoring chips must be contained in a metal smoking box to contain ash and prevent fires. •...

  • Page 5: Installation And Lp Cylinder Specifications And Safe Use

    WARNING • FOR OUTDOOR USE ONLY. DO NOT operate indoors or in an enclosed area such as a garage, shed or breezeway. • Use your grill OUTDOORS in a well ventilated space away from dwellings or other buildings to prevent dangers associated with gas accumulation and toxic vapors. We recommend your grill be situated at least 10 feet (3.1 m) from buildings.
  • Page 6 CYLINDER SPECIFICATIONS: When purchasing or exchanging a cylinder for your gas grill, it must be constructed and marked in accordance with the specifications for LP gas cylinders of the U.S. Department of Transportation (DOT) or the National Standard of Canada, CAN/CSA-B339 Cylinders, Spheres and Tubes for Transportation of Dangerous Goods;...

  • Page 7: Connecting Lp Cylinder And Hose / Regulator To Grill

    WARNING FILLING THE LP GAS CYLINDER: • Allow only qualified LP gas dealers to properly fill or repair your LP gas cylinder. • New tanks should be purged prior to filling; inform LP gas dealer if you are using a new tank. •...
  • Page 8 WARNING • Never use your grill without leak testing all gas connections and hoses. See the section on "Leak Testing" in this manual for proper procedures. WARNING The pressure regulator and hose assembly supplied with your gas grill must be used. •...

  • Page 9: Leak Testing

    DANGER LEAK TESTING: To prevent fire or explosion hazard: • DO NOT smoke or permit ignition sources in the area while conducting a leak test. • Perform test OUTDOORS only in a well ventilated area. • Never perform a leak test with a match or open flame. •...

  • Page 10: Pre-Start Check List

    6. Check each place listed (A–K) for growing bubbles which indicates a leak. 7. Turn off gas supply at cylinder valve. 8. Turn on control knobs to release gas pressure in hose. 9. Turn control knobs to "OFF" position. 10. Tighten any leaking connections. 11.

  • Page 11: Connecting Lp Cylinder And Hose / Regulator To Grill

    WARNING Read, understand and follow all warnings and instructions contained in this manual. DO NOT skip any of the warnings and instructions contained in the preceding sections of this manual. WARNING LIGHTING INSTRUCTIONS: Follow the instructions exactly. 1. OPEN THE GRILL LID before attempting to light a burner so that fumes do not accumulate inside the grill.

  • Page 12: Connecting Lp Cylinder And Hose / Regulator To Grill

    LIGHTING THE SIDE BURNER: 1. Open lid before lighting side burner. 2. Make sure control knob is in the "OFF" position. 3. Push and turn side burner control knob to the "HIGH" position. 4. Press the electronic igniter on the main control panel and hold for 3–5 seconds to light burner.

  • Page 13: Operating Grill And Helpful Hints

    WARNING OPERATING THE GRILL: Never use Charcoal or Lighter Fluid inside your Gas Grill. Read and follow all warnings and instructions contained in the preceding sections of this manual. BREAKING IN YOUR GRILL: • In manufacturing and preserving the components of your grill, oil residue may be present on the burner and cooking surfaces of your grill.

  • Page 14: Rotisserie Cooking

    ROTISSERIE COOKING: • Your grill was pre-drilled from factory to include mounting holes for a rotisserie (sold separately). Do not use a rotisserie not specifically manufactured for this grill. • Read and follow all instructions provided with the rotisserie. Save instructions for future reference. •...

  • Page 15: Proper Care And Maintenance

    GRILL COOKING TIPS CLEANLINESS • Always wash hands thoroughly with soap and hot water prior to handling food and after handling raw meat, uncooked poultry or seafood. • When using a platter to carry raw meat, uncooked poultry or seafood to the grill, make sure to wash the platter thoroughly with soap and hot water before placing cooked foods back on the platter or use different platters for raw and cooked foods.

  • Page 16: Cleaning And Maintenance

    CLEANING AND MAINTENANCE: • Keep the appliance free and clear of combustible materials, gasoline and other flammable vapors and liquids. • Keep the ventilation openings of the cylinder enclosure free and clear of debris. • Visually check burner flames for proper operation (see pictorial in "Burner Assembly/Maintenance" under Proper Care and Maintenance).

  • Page 17: Transporting And Storage

    COOKING GRILLS • Clean with mild soap detergent and water. A brass bristled brush or a nylon cleaning pad can be used to remove residue from the stainless steel surfaces. Do not use steel wire bristles to clean the cooking grills.

  • Page 18: Trouble Shooting

    TROUBLE SHOOTING Problem: Possible Causes: 1. Check LP cylinder fuel level. 2. Bad electrode spark. Check to see if the grill will match light. Electrode or collector may need adjustment. • Burner will not light 3. Burner may not be properly seated. 4.

  • Page 19: Lighting Instructions

    If the fuel line is blocked, replace with a new hose / regulator assembly. • If an obstruction is suspected in the hose / regulator assembly, orifice or gas valves call Brinkmann Customer Service at 800-527-0717. Question: Why does my LP gas grill have a low flame or a flame with orange / yellow color? Answer: You need to purge air from the gas line or reset the regulator's flow limiting device.

  • Page 20: Frequently Asked Questions

    Regulator Resetting Procedure under Connecting LP Cylinder and Hose/Regulator to Grill. This procedure should be done every time a new LP gas tank is connected to your grill. For help, refer to your owner’s manual or call Brinkmann Customer Service at 800-527-0717.

  • Page 21: Parts List And Assembly Instructions

    PARTS BAG CONTENTS Make sure you have all items listed under PARTS LIST and PARTS BAG CONTENTS before you begin the installation process. Your Parts Bag will include: Qty. Qty. M6 X 10mm Bolts (Black) 16 Flat Washers (Silver) M4 X 10mm Bolts (Silver) Star Washers (Black) 42 M6 X 15mm Bolts (Silver) AA /1.5V Alkaline Battery...

  • Page 22: Assembly Instructions

    ASSEMBLY INSTRUCTIONS READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR OPERATING YOUR GRILL. WE RECOMMEND TWO PEOPLE WORK TOGETHER WHEN ASSEMBLING THIS UNIT. The following provided tools are required to assemble this 810-8425-S Stainless Steel Gas Grill: •...
  • Page 23 FOR GRILL WARRANTY REPLACEMENT PARTS, PLEASE VISIT US AT: www.grillpartsonline.com (Proof of purchase will be required.) Inspect contents of the box to ensure all parts are included and undamaged.
  • Page 24 Choose a good, cleared assembly Front area and get a friend to help you put your grill together. Lay cardboard Swivel Fixed down to protect grill finish and Caster Caster assembly area. CAUTION: Some parts may contain sharp edges. Wear protective Swivel gloves if necessary.
  • Page 25 Step 3 Attach left side cart panel (#17) to Left Side Cart cart base (#19) using two Panel M6 X 15mm bolts (silver). Note:Rear cart panel aligns to the inside of the left and right side cart panels. Step 4 Attach left side cart panel (#17) to rear cart panel (#15) using two M6 X 15mm bolts (silver).
  • Page 26 Step 5 Attach right side cart panel (#16) to cart base (#19) using two M6 X 15mm bolts (silver). Right Side Cart Panel Step 6 Attach right side cart panel (#16) to rear cart panel (#15) using two M6 X 15mm bolts (silver). Right Side Cart Panel...
  • Page 27 Step 7 Attach center cart panel (#18) to cart base (#19) using two M6 X 15mm bolts (silver). Center Cart Panel Step 8 Attach center cart panel (#18) to rear cart panel (#15) using three M6 X 15mm bolts (silver).
  • Page 28 Step 9 Insert the tank retention screw (#33) into the hole in the back of the cart base (#19). Step 10 Attach door stop (#26) to cart base (#19) using two M4 x 10mm bolts (silver).
  • Page 29 Step 11 Attach door frame (#23) to left (#18) and right (#16) cart panels using four M6 X 15mm bolts (silver). Secure center cart panel (#18) to door frame (#23) using one M4 X 10mm bolt (silver). Step 12 Attach drawer handle (#29) to drawer (#28) using two M6 X 10mm bolts each (previously installed in...
  • Page 30 Step 13 Insert drawers (#28) into drawer glides in cart body. Step 14 Install top door hinge bracket (#27) on right side cart panel (#16) with two bolts. Bolts are pre-installed in right side panel.
  • Page 31 Step 15 Insert pin in bottom of right side door (#24) into hole in bottom of cart base (#19) then align door with top door hinge bracket (#27). Depress spring Spring Pin pin located on top edge of door and slide door toward top door hinge bracket until spring pin locks into place.
  • Page 32 Step 17 With the help of a friend, place the grill body assembly (#1) on grill cart, secure using four M6 X 10mm bolts and star washers (black). Step 18 Attach grease tray handle (#34) to grease tray (#20) using two M4 X 6mm bolts (pre-installed in the handle) ,and then insert it into opening on front side of grill.
  • Page 33 Step 19 Insert grease cup (#21) into rear cart panel (#15) hole. Step 20 Remove igniter cap (#7) and insert battery with positive end of battery toward igniter cap. Ensure spring is in place inside igniter cap. Replace igniter cap and make sure the igniter is working properly.
  • Page 34 Step 21 Attach the side table handle (#4) to left side table (#2) using two M6 X 10mm bolts (pre-installed in the handle). Attach left side table front panel (#3) to left side table (#2) using two M6 X15mm bolts and star washers (silver).
  • Page 35 Step 23 Attach side burner front panel (#6) to side burner assembly (#5) using two M6 X15mm bolts and two star washers (silver). Step 24 Attach side burner assembly (#5) to right side of cart frame assembly. Loosen four M6 X 10mm bolts (silver - pre-installed in grill body assembly) about halfway.
  • Page 36 Step 25 Burner Venturi Remove two M4 bolts and spring washers from the side burner valve. Insert the side burner valve stem Side assembly through the hole in the Burner side burner front panel (#6) , then Valve firmly seat the valve nozzle into the burner venturi.
  • Page 37 Step 27 Attach side burner igniter lead wire to the electrode as illustrated. Side Burner Igniter Lead Electrode Step 28 Place the side burner grate (#11) onto the side burner table (#5).
  • Page 38 Step 29 Cooking Grills Place the heat distribution plates (#13) lower level of grill body assembly directly above burners. Heat Distribution Plates Step 30 Place cooking grill (#14) on support ribs directly above heat distribution plates. Warming Rack Brackets Step 31 Place warming rack (#12) in slots above cooking grills.
  • Page 39 810-8425-S (Assembled)
  • Page 40 The Brinkmann Corporation exige un comprobante de compra razonable. Por lo tanto, le recomendamos enfáticamente que retenga su recibo o factura de venta. Para obtener partes de repuesto para la parrilla Grill King™ Parilla de Gas de Acero Inoxidable bajo los términos de esta garantía, sírvase contactar al Departamento de Servicio al Cliente al 800-527-0717.

This manual is also suitable for:

810-8425-s

Table of Contents