Topfield TF 7700 HD PVR User Manual page 62

54 Listing Services
To use Vega, you have to prepare a RS-232 cable to link the
digital receiver with your personal computer. If your computer
does not have a RS-232 port, use a USB to RS-232 converter
cable. When connecting with a RS-232 cable using a USB to
RS-232 converter cable, you have to set a COM port number of
the connection to COM1 or COM2. Otherwise, the computer
cannot recognize the connection to the receiver.
Turn off the digital receiver if it is on, and then Run Vega. To
import the channel data from the digital receier, perform the
following steps:
1. Select the Mode
2. Select the Up & Down
3. A box appears asking for your confirmation. Press the
Upload button on it.
4. Turn on the digital receiver. Data transfer will start as
soon as it is turned on.
Of course, you can open a std file instead of importing the chan-
nel data from the digital receiver if you have one. When you
have finished your work, you have to perform the following
steps to export the channel data to the digital receiver.
1. Select the Up & Down
2. A box appears asking for your confirmation. Press the
Download button on it.
3. Turn on the digital receiver. Data transfer will start as
soon as it is turned on.
Plug one end of a RS-232 cable (9 pin D-sub
cable) into the RS-232 port on the digital
receiver, and the other end into the matching
port on your computer.
Serial menu.
Upload from STB menu.
Download to STB menu.