Default Settings - McIntosh MHT200 Owner's Manual

MAIN SYSTEM SETUP
1. SPEAKER SETUP
2. SOURCE SETTINGS
3. VIDEO POWER CONTROL
4. TUNER PRESETS
5. MODE SETUP
6. SYSTEM SETTINGS
EXIT
Figure 12
5. Exit the MAIN SYSTEM SETUP Menu by pressing
the Up or Down directional push-buttons followed
by the SELECT Push-button.
6. If adjustments have been performed, the Adjustment
Acceptance Menu will appear on the Monitor/ TV
screen asking if you want to save the adjustments in
memory. Use the Up
buttons to select YES to save, or NO to not save, then
press the SELECT Push-button to exit the Setup Mode
and return to normal operation. Refer to figure 13.
DO YOU WANT TO SAVE THEM?
0. NO
1. YES
Figure 13
or Down directional push-

Default Settings

The following listings indicate the factory default settings.
Refer to the listed page number for instructions on how to
change a default setting.
Speaker Size:
Speaker Type Size or ON/OFF
Front ........................ Small ........................... 27
Center ...................... Small ........................... 27
Surround .................. Small ........................... 27
Back ........................ 1 Small ........................ 27
Subwoofer ............... Yes .............................. 27
Speaker Level:
Speaker Location Initial Level
Left Front ...................0dB ........................... 28
Center ......................... 0dB ........................... 28
Right Front .................0dB ........................... 28
Right Surround ...........0dB ........................... 28
Right Back .................None ......................... 28
Left Back ....................0dB ........................... 28
Left Surround .............0dB ........................... 28
Subwoofer .................. 0dB ........................... 28
Speaker Time Delay:
Speaker Location Distance
Left Front .............. 6ft ................................. 31
Center .................... 5ft ................................. 31
Right Front ............ 6ft ................................. 31
Right Surround ...... 3ft ................................. 31
Right Back ............ None ............................. 31
Left Back ............... 0ft ................................. 31
Left Surround ........ 3ft ................................. 31
Subwoofer ............. 0ft ................................. 31
Subwoofer Settings:
Setting Initial Setting
MC Bass .....................Off ............................ 33
Sub Crossover ............ 80Hz ......................... 33
Dolby LFE Level ......0dB ........................... 33
1
Sub Filter ....................On ............................. 33
1
DD (Dolby Digital) LFE (Low Frequency Effect) Sound
Information is usually assigned to the Subwoofer Channel. If
the Subwoofer Channel is switched off and the Front
Channel Loudspeakers are set to Large in the Speaker Size
Setup Menu, the LFE Sound Information will be redirected
to the Large Loudspeaker(s).
SETUP
Refer to Page
Refer to Page
Refer to Page
Refer to Page
25