Storm Control - EverFocus ES0802-41 User Manual

PoE Switch
Remote access and monitor the attached PD (Powered Device) status by using
Enable/Disable function.
 PoE Enabled: POE of the port is able to supply power to the attached PD (Powered
Device)
 PD Class: Detect the class of PD
 Delivering Power (W): Output power
 Current (mA): The status of the port current
 Voltage (V): The status of the port current
 Power Budget: Total PoE power has been used
Figure 1-12-1

Storm Control

Broadcast storms may occur when a device on your network is malfunctioning, or if
application programs are not well designed or properly configured. If there is too
much broadcast traffic on your network, performance can be severely degraded or
everything can come to complete halt.
You can protect your network from broadcast storms by setting a threshold for
broadcast traffic for each port. Any broadcast packets exceeding the specified
threshold will then be dropped.
Storm Control Configuration
There are three type of traffic which can be rate limited, including broadcast
multicast frame and Flooded Uncast Rate.
23