Table of Contents
Advertisement
QoS Mode: DSCP
DSCP: Packets are prioritized using the DSCP (Differentiated Services Code
Point) value. The Differentiated Services Code Point (DSCP) is a six-bit field that is
contained within an IP (TCP or UDP) header. The six bits allow the DSCP field to take
any value in the range 0 - 63. When QoS Mode is set to DSCP, the DSCP
Configuration table is displayed, allowing you to map each of the DSCP values to a
hardware output queue (low, normal, medium or high). The default settings map all
DSCP values to the high priority egress queue.
User can use the Prioritize Traffic drop-down list to quickly set the values in the
Figure 1-11-3
Figure 1-11-4
21
PoE Switch
Advertisement
Table of Contents
