Time Displays - Mackie HDR24 Quick Start Manual

Time Displays

HDR 24/96 Front Panel
HOURS MINUTES SECONDS FRAMES
K
BARS BEATS TICKS
HDR 24/96 GUI
The Current Time display shows the exact position of the HDR24/96's
"playback head." In the GUI, Current Time is represented both by an eight
digit numeric display in the top right corner and by a vertical yellow line
called the Time Line.
The time format can be displayed in the GUI as SMPTE
(HH:MM:SS:Frames), Bars Beats Ticks (BBT), Milliseconds
(HH:MM:SS:mmm), or Samples. The front panel displays only SMPTE or
BBT time formats. It displays SMPTE time when Milliseconds or Samples is
selected.
To change the Current Time:
Use the Transport Play, Rewind, Fast Forward or Loc buttons.
♦
Use the Loc button, recall a Cue (see Cues on page 34) or click
♦
anywhere on the Time Bar when the Transport is stopped.
To change the time in any GUI time display (including Current Time):
Click in the time display and drag the mouse
♦
up or down to increment or decrement the
value; click outside the display to make the
new time active.
Click in the time display and type a specific time. TAB or
♦
SHIFT+TAB to move between fields; hit ENTER to make the new
time active.
To change the Time Units:
Right-click on the Time Bar or in any time
♦
display (except in the Cue List and the Setup
window), and select one of the four options
from the Time Units pop-up menu.
Just in case you were looking - you can only
♦
switch the Time Units from the GUI.
Current Time Display
Current Time Display
Marker Bar
Time Bar
Quick Start Guide
31