Basic Transport Operations - Mackie HDR24 Quick Start Manual

Basic Transport Operations

30
HDR 24/96
The HDR24/96 transport and recording controls are similar to those on most
multitrack tape recorders.
Play
Play puts the HDR24/96 into play from any state (as if you didn't know). Play
also punches out of record and cancels master record standby while leaving
the Transport in play.
To put the Transport into play:
Press Play.
♦
Click Play.
♦
Press the Spacebar when the Transport is stopped.
♦
Fast Wind
Rewind and Fast Forward put the HDR24/96 into fast wind mode from any
state. They behave just like those on a large multitrack recorder – when
pressed from stop, the "tape" rolls slowly at first, then accelerates to 20X
speed in a few seconds. Pressing either button a second or third time
increases the winding speed.
To put the Transport into fast wind:
Press Rewind or Fast Forward one, two, or three times.
♦
Click Rewind or Fast Forward one, two, or three times.
♦
Press SHIFT+< or SHIFT+> one, two, or three times.
♦
Stop
Stop brings the "tape" to an immediate halt. Stop also punches out of record
and cancels master record standby.
To stop the Transport:
Press Stop.
♦
Click Stop.
♦
Press the Spacebar when the Transport is moving (either playing,
♦
recording, or winding).
REWIND FAST FWD STOP PLAY RECORD