Pioneer DDJ-WEGO Quick Start Manual page 3

 Installation procedure (Windows)
1 Insert the included CD-ROM into the computer's CD
drive.
2 When the CD-ROM's menu is displayed, select [Install
VIRTUAL DJ LE(DDJ-WeGO)], then click [Start].
The VIRTUAL DJ LE installer is launched.
3 Once the VIRTUAL DJ LE installer is launched, click
[Next].
— To return to the previous screen: click [Back].
— To cancel installation: click [Cancel].
DDJ-WeGO
4 Read the contents of the [End-User License
Agreement] carefully, and if you agree, check [I accept
the terms in the License Agreement], then click [Next].
If you do not agree to the terms of the [End-User License Agreement],
click [Cancel] to cancel installation.
DDJ-WeGO
5 Select the type of installation for VIRTUAL DJ LE, then
click [Next].
— When [Typical] is selected, plug-ins and other components are
installed simultaneously. Normally select [Typical].
— When [Custom] is selected, you can select which components to
install.
DDJ-WeGO
6 When the screen below is displayed, click [Install].
Installation begins.
The installation completed screen appears once installation is
completed.
DDJ-WeGO
7 Click [Finish].
This completes the installation procedure.
VIRTUAL DJ LE is launched if [Launch VirtualDJ] on the screen is
checked when [Finish] is clicked.
DDJ-WeGO
8 Input the serial number printed on this unit's bottom
panel (XXXX-XXXX-XXXXX/WEGO), then click [OK].
3
En