Pioneer DDJ-WEGO Quick Start Manual page 4

 Installation procedure (Mac OS X)
1 Insert the included CD-ROM into the computer's CD
drive.
The [CD_menu] icon appears on the screen. Double-click it.
2 When the CD-ROM's menu is displayed, select [Install
VIRTUAL DJ LE(DDJ-WeGO)], then click [Start].
The VIRTUAL DJ LE installer is launched.
3 Once the VIRTUAL DJ LE installer is launched, click
[Continue].
4 Read the contents of the license agreement carefully,
click [Continue] and then click [Agree] to accept the
license agreement.
If you do not agree to the license agreement, click [Disagree] to cancel
installation.
5 Select the type of installation for VIRTUAL DJ LE, then
click [Install].
— To select standard installation, click [Install].
— To install in a different location, click [Change Install
Location...] and choose the place of installation.
Installation begins.
The installation completed screen appears once installation is
completed.
6 Click [Close].
This completes the installation procedure.
 Checking the latest information on the VIRTUAL
DJ LE software
For the latest information on the operating environment and compatibil-
ity, and to acquire the latest operating system, please visit the following
Atomix productions website:
To obtain the latest version of the VIRTUAL DJ LE software, you must
register your user account on the Atomix productions website.
http://www.virtualdj.com
Connecting the input/output
terminals
ON/OFF switch
For checking the
output sound
Headphones
DJ software
Computer
Be sure the power is off when connecting equipment and changing
connections.
Be sure to use the USB cable included with this product.
Refer to the operating instructions for the component to be connected.
With this unit, the power is supplied by USB bus power. The unit can be
used simply by connecting it to a computer using the USB cable.
4
En
R L
For audio input
Microphone
For audio output
Component, amplifier,
powered speaker, etc.
! Connect this unit and the computer directly using the included USB
cable.
! Connect the computer to which this unit is to be connected to an AC
power supply.
! A USB hub cannot be used.
Starting the system
Starting this unit
1 Connect this unit to your computer via a USB cable.
2 Boot up the connected computer.
3 Slide this unit's [ON/OFF] switch to the [ON] position.
Launching VIRTUAL DJ LE
When this unit has just started, wait for the illumination to stop before
launching VIRTUAL DJ LE.
 Launching VIRTUAL DJ LE (Windows)
1 From the Windows [Start] menu, click the [All
Programs] > [VirtualDJ] > [VirtualDJ LE (DDJ-WeGO)]
icon.
2 Click [CONFIG] in the top right of the computer's
screen.
The [Settings] screen appears.
Settings should be selected on the [Sound Setup] tab in the following
order:
1 [Inputs]: Select [NONE].
2 [Sound card]: Select [ASIO DRIVER] and
[Pioneer DDJ_WeGO ASIO].
3 [Outputs]: Select [HEADPHONES] and
[Master: Chan 1&2/Headphones: Chan 3&4].
3 Click [Apply], then click [OK].
 Launching VIRTUAL DJ LE (Mac OS X)
1 In Finder, open the [Application] folder, then double-
click the [VirtualDJ LE] icon.
When VIRTUAL DJ LE is launched the first time, a screen for entering the
serial number appears.
Input the serial number printed on this unit's bottom panel (XXXX-
XXXX-XXXXX/WEGO), then click [OK].