Tuner; Listening To The Radio - Pioneer AVH-P6500DVD Operation Manual

Section
05

Tuner

Listening to the radio

1 2
5
7 6
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
1 Source icon
Shows what the source has been selected.
2 Band indicator
Shows which band the radio is tuned to, AM
or FM.
3 Preset number indicator
Shows what preset has been selected.
4 Frequency indicator
Shows to which frequency the tuner is
tuned.
5 Preset list display
Shows the preset list.
6 STEREO indicator
Shows that the frequency selected is being
broadcast in stereo.
7 LOCAL indicator
Shows when local seek tuning is on.
26
En
3 4
1 Touch the source icon and then touch
TUNER to select the tuner.
# When the source icon is not displayed, you
can display it by touching the screen.
2 Touch the screen to display the touch
panel keys.
3 Touch BAND to select a band.
Touch BAND repeatedly until the desired band
is displayed, FM1, FM2, FM3 for FM or AM.
4 To perform manual tuning, touch c or
d shortly.
The frequencies move up or down step by
step.
# You can also perform manual tuning by mov-
ing the joystick left or right.
5 To perform seek tuning, keep touching
c or d for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
# You can cancel seek tuning by touching either
c or d shortly.
# If you keep touching c or d you can skip
broadcasting stations. Seek tuning starts as soon
as you release the keys.
# You can also perform seek tuning by holding
the joystick left or right.
Note
If you do not use the touch panel keys for 30 sec-
onds, they will be hidden automatically.