Block Diagram; Installation - Signal Audio Workshop CH2-M Owner's Manual

Control Room Block Diagram:
This chapter details the signal chain structure in order to help
you better understand the control room section functions.
All signal stages are passive and unbalanced.
Installing the unit:
Always install this unit in a properly grounded environment!
Do not expose the unit to humidity or dusty environment!
Do not expose the unit to heat sources and unventilated places!
Always make sure that the unit operates on the correct mains
voltage (230/115 VAC) before applying mains voltage!
Signal AWS will not be responsible for damages created by
improper mains voltage issues.
All audio connections in the
preamp section are balanced
threw XLR connectors with the pin
shown list:
Control Room section ¼" Connection Diagram:
When connecting unbalanced signals to balanced connections and
vice versa, the connection will be done according to standard.
Sleeve
Tip
PIN1 GND
PIN2 HOT
PIN3 COLD
Ground
Signal
10