Mini Pci Card Removal - Toshiba Satellite 5000 Series General Information Manual

Hide thumbs Also See for Satellite 5000 Series:
Table of Contents

Advertisement

FIELD REPLACEABLE UNIT DOCUMENTATION

MINI PCI CARD REMOVAL

PCI clips
3. Gently press out the Mini PCI slot clips and pull the
Mini PCI card out of the connector on a 30 degree
angle.
MODEM BOARD REMOVAL
M2x3 black screws
3. Disconnect the MJ harness from JP1 on the modem board
and PJ108 on the system board.
4. Remove two M2x3 black screws securing the
modem board.
5. Lift up the modem board to disconnect it from the
system board.
Satellite
5000 Series
Mini PCI
card
Modem
MJ Harness
TOSHIBA
Tough Enough for Today's World
TM
MODEM BOARD REMOVAL
Modem slot cover
M2.5x4 black flat head screws
1. Remove two M2.5x4 black flat head screws securing
the modem slot cover.
2. Insert your finger nail or the case separator into the
notched side of the cover and lift up to release the
latch securing the modem slot cover.
KEYBOARD REMOVAL
Latch
Keyboard holder
1. Open the display panel.
2. Remove the keyboard holder at the top of the
keyboard.

Advertisement

Table of Contents
loading

Table of Contents