Mazda 2012 5 Owner's Manual page 297

In Case of an Emergency
Flat Tire
qJack
To remove the jack
1. Remove the cover.
2. Turn the wing bolt and jack screw
counterclockwise.
Jack screw
7-4
Wing bolt
To secure the jack
1. Insert the wing bolt into the jack with
the jack screw pointing down and turn
the wing bolt clockwise to temporarily
tighten it.
2. Turn the jack screw in the direction
shown in the figure.
Jack screw
3. Turn the wing bolt completely to
secure the jack.
NOTE
If the jack is not completely secured, it could
rattle while driving. Make sure the jack screw
is sufficiently tightened.
Maintenance
Always keep the jack clean.
l
Make sure the moving parts are kept
l
free from dirt or rust.
Make sure the screw thread is
l
adequately lubricated.
Wing bolt