Mazda 2012 5 Owner's Manual page 218

"UPDATING xx%" is displayed when the
SIRIUS channel map is changed. If the
unit is initialized or the user contract
content is changed, "UPDATING" is
displayed. Updating could take as long as
three minutes depending on the
geographical area. When the unit is in an
initialized state, channel 184 is displayed
after the display indicates
"UPDATING 100%". If the SIRIUS
channel map or the user contract content
is changed, the channel prior to the
change is displayed after "UPDATING" is
displayed. After the initialization display,
it may take as long as 12 seconds to
receive channel 184.
NOTE
Do not perform the following operation while
"UPDATING" is displayed. Otherwise, the
updating procedure will be cancelled.
Turning off the audio power
l
Switching to other modes
l
Switching the ignition off
l
When the SIRIUS mode is switched to
another mode, or when the power is
turned off, the present channel which is
being received is stored as the last
channel.
Channel selection
Turning the manual tuning dial allows you
to select the desired receiving channel.
Turn the knob clockwise: Channel Up
l
Turn the knob counterclockwise:
l
Channel Down
Unsubscribed channel
When a selected station has not been
subscribed to, the display indicates the
following:
After the channel number is displayed,
[CALL 888] and [539
(Flashes alternately) is displayed.
SIRI]
NOTE
When the subscription contract is canceled, all
of the channels including channel 184 appear
as unsubscribed.
Invalid channel
The display switches between [SR
(bank number) INVALID] and [SR
(bank number) CHANNEL] only when
a selected channel is not broadcasting.
NOTE
If the last channel selected has become
unavailable because of a channel update the
above indication is displayed until any button
is pressed.
Preset channel programming
(Programming with "channel number"
display)
1. Select the desired channel to be
programmed. At this point, the
following is displayed:
[SR (bank number)
number)]
2. Keep pressing the channel preset
button for 1.5 seconds or more.
The programming process is complete
after the channel number flashes. Then,
[SR (bank number)] is displayed
and a beep sound is heard at the same
time.
3. [SR (bank number)
(preset number)
are displayed.
Interior Comfort
Audio System
(channel
CH
(channel number)]
6-31