Mazda 2012 5 Owner's Manual page 195

Interior Comfort
Climate Control System
qOperation of Automatic Air
Conditioning
1. Press the AUTO switch. Selection of
the airflow mode, air intake selector
and amount of airflow will be
automatically controlled.
2. Use the temperature control dial to
select a desired temperature.
Cold
To turn off the system, press the OFF
switch.
NOTE
Setting the temperature to maximum high
l
or low will not provide the desired
temperature at a faster rate.
When selecting heat, the system will restrict
l
airflow until it has warmed to prevent cold
air from blowing out of the vents.
6-8
Hot
qWindshield Defrosting and Defogging
Press the windshield defroster switch.
In this position, the outside air position is
automatically selected, and the air
conditioner automatically turns on. The
air conditioner will directly dehumidify
the air to the front windshield and side
windows (page 6-4). Airflow amount will
be increased.
WARNING
Set the temperature control to the hot
or warm position when defogging (
position):
Using the position with the
temperature control set to the cold
position is dangerous as it will cause
the outside of the windshield to fog
up. Your vision will be hampered,
which could lead to a serious
accident.
NOTE
Use the temperature control dial to increase
the air flow temperature and defog the
windshield more quickly.