Mazda 2012 5 Owner's Manual page 250

7. Press the audio control dial to delete
the selected device.
NOTE
Select "GO BACK" and press the audio
control dial to return to the "PAIR DELETE"
display.
8. "PAIR DELETED" is displayed for
three seconds after the deletion is
completed, and then it returns to the
normal display.
NOTE
If an error occurs while trying to delete the
programmed device, "Err" flashes in the
display for three seconds and the display
returns to "LINK DELETE".
Bluetooth audio device information
display
1. Using the audio control dial, select the
pair device information display mode
"DEVICE INFO" in the "BT SETUP"
mode. (Refer to
"Bluetooth audio device set-up" for
details.)
2. Press the audio control dial to
determine the mode.
3. The name of the Bluetooth unit device
is displayed.
Bluetooth Audio
4. Rotate the audio control dial to select
the information for the Bluetooth unit
which you would like to view.
NOTE
When "GO BACK" is selected and the audio
control dial is pressed, the display returns to
"DEVICE INFO".
qHow to Use the Bluetooth Audio
System
Switching to Bluetooth audio mode
To listen to music or voice audio recorded
to a Bluetooth audio device, switch to the
Bluetooth audio mode to operate the
audio device using the audio system
control panel.
Any Bluetooth audio device must be
programmed to the vehicle's Bluetooth
unit before it can be used. (Refer to
"Bluetooth audio device programming")
1. Switch the ignition to ACC or ON.
2. Turn on the Bluetooth audio device's
power.
Make sure that the " " symbol is
displayed in the information display.
The symbol is not displayed if an
unprogrammed Bluetooth audio device
is being used or the vehicle's Bluetooth
unit has a malfunction.
Interior Comfort
Device name
BT address
6-63