Switch Housing
www.HunterFan.com
1.888.830.1326
Screw two housing assembly screws
Wrap the keyhole slots in the upper
Insert the third screw, found in
from the
hardware bag halfway into
switch housing around the screws and
the
hardware bag, into place and
the motor housing. It does not matter
twist counterclockwise.
then tighten all three screws.
which two screw holes you choose.
Make sure the upper switch housing is securely
attached to the mounting plate. Failure to properly
secure all 3 assembly screws could result in the switch
housing fixture falling.
14
M0096-01 • 04/23/14 • © Hunter Fan Company