Safety Instructions
Important Safety Instructions
Read all of these instructions and save them for later reference.
Follow all warnings and instructions marked on the copy
station.
Do not block or cover the openings in the printer or the scanner.
Do not insert objects through the slots in the printer or the
scanner.
Do not spill liquid on the copy station.
Use only the type of power source indicated on the printer
and scanner labels.
Connect all equipment to properly grounded power outlets.
Avoid using outlets on the same circuit as photocopiers or air
control systems that regularly switch on and off.
Do not use a damaged or frayed power cord.
Unless otherwise explained in this guide, do not attempt to
service this product yourself.
Unplug the copy station and refer servicing to qualified
service personnel under the following conditions:
If a power cord or plug is damaged; if liquid has entered the
copy station; if any copy station component has been dropped
or the cabinet damaged; or if the copy station does not operate
normally or exhibits a distinct change in performance. Adjust
only those controls that are covered by the operating
instructions.
Safety Instructions
1