Table of Contents
Advertisement
REMOTE CONTROL UNIT
1
2
3
4
5
6
7
8
BASIC CONNECTION
— It is recommended to connect a multi-system TV.
—
Ensure that this player and other equipment to be connected are set to the standby mode or off and disconnect the AC power
cords before commencing connection.
—
Do not block ventilation holes of any of the equipment and arrange them so that air can circulate freely.
—
Read through the instructions before connecting other equipment.
— Ensure that you observe the color coding when connecting RCA adapter and RCA cable (not included).
Note:
—
During DVD play, the TV volume may be at a lower level than during TV broadcasts, etc. If this is the case, adjust the volume
to the desired level.
—
If the DVD/CD player is connected to the TV through a video cassette recorder, the picture may not be played back normally
with some DVDs. If this is the case, do not connect the player via the VCR.
Connecting to a stereo TV set
S-VIDEO
AUDIO R AUDIO L VIDEO IN
AV AUDIO/VIDEO INPUT
RCA cable (not included)
RCA adapter
9
10
11
12
13
14
15
16
17
18
19
20
YUV INPUT
TV SET
1. SCREEN ON/OFF & BRI/COL ADJUST BUTTON
2. TITLE BUTTON
3. PREV & F_BWD BUTTON
4. NEXT & F_FWD BUTTON
5. NAVIGATION BUTTONS
6. NUMERIC BUTTONS
7. PROGRAM/ANGLE BUTTON
8. VOLUME - BUTTON
9. MUTE BUTTON
10. SETUP BUTTON
11. MENU BUTTON
12. DISPLAY BUTTON
13. STOP & USB/SD/MMC CARD BUTTON
14. OK(PLAY/PAUSE) BUTTON
15. SUBTITLE BUTTON
16. AUDIO BUTTON
17. SEARCH BUTTON
18. REPEAT BUTTON
19. ZOOM/SLOW BUTTON
20. VOLUME + BUTTON
Connecting to an affiliated screen
This unit is equipped with another affiliated screen, you can
use the affiliated screen and player to appreciate the
programme at the same time, the connecting method is
illustrated as below using the in car adaptor.
To the cigarette lighter socket
3
A/V cable
Slave screen connector
Advertisement
Table of Contents
