Table of Contents
Advertisement
Installation of the portable DVD player in a vehicle
- On no account should this unit be used by the driver of a moving vehicle, or left unsecured in the vehicle whilst
driving.
- If this unit is being used by a passenger, ensure that it is secured or held safely, and that it does not obstruct any
safety devices (eg. Airbags, Seatbelts etc).
- Some vehicles have what is known as an "Active Headrest". If your vehicle has this feature, please consult your
vehicle's manufacturer to determine whether the screens can be attached safely to your vehicle headrest.
1
1. First, take the Slave screen and place it with the rear facing towards you.
2. Thread one Headrest Strap to the back of the Slave screen as shown.
3. Wrap the strap around the head rest on the front seat.
4. Make sure that the Slave screen is now attached reasonably securely to the vehicle's headrest, then attach the
Main DVD/Screen unit to the other headrest in a similar fashion.
TO DC OUT
SOCKET
Slave screen power connector cable
5
5. Connect the Car power adapter as shown. Your portable DVD player and slave screen now be used for in-car
entertainment, as long as the vehicle's engine is running. Note that the remote sensor is only on the Main unit,
so use of the remote control will have to be adjusted accordingly.
WARNING
2
Slave screen
TO DC IN SOCKET
A/V cable
3
TO THE CIGARETTE
LIGHTER SOCKET
Car power adaptor
Main DVD/Screen unit
8
4
MAIN DVD
PLAYER/SCREEN
TO DC IN / CAR POWER
INPUT SOCKET
Advertisement
Table of Contents
